Wheel FAQ

[ma71supraturbo]

Please post any wheel questions in here. We're getting 2 wheel questions a day, often asking the same information...



Can I fit (insert tire size here) on the (insert wheel size here)?

I don’t know. Go look for yourself. Tirerack.com lists tire specs for each model of tire. Search for the tire size you think you want and see what tires come back from the search. Then click on “specs”. You’ll see a chart listing all available tire sizes. For each size, a rim width range is provided. For example, Dunlop SP 9000’s specs are here: http://www.tirerack.com/tires/Spec.jsp?make=Dunlop&model=SP+Sport+9000 A 225/50/16 tire can fit on as narrow as a 16X6 wheel, or as wide as a 16X8 wheel. A 275/40/17 tire can fit on a 17X8.5 wheel up to a 17X11…
But each tire is different, and they all have different specs. Here is a BFG drag radial spec sheet: http://www.tirerack.com/tires/Spec.jsp?make=Dunlop&model=SP+Sport+9000 A 255/50/16 can fit on the stock sawblade (16X7). But if you look at a 275/40/17, the rim width range is 9-11”, not 8.5-11” like the Dunlop SP 9000


What is the stock bolt pattern?
5X114 (4.5”)


What is a wheel offset?
http://www.tirerack.com/wheels/tech/offset.htm has some basic information on wheel offsets. The stock sawblade offset is positive 35. MKIV wheels have a positive offset of 50. If you want to run a 10” wide wheel you should at least have a 45 offset.
Also check out Steve Jarvis' wheel fitment page (designed for MKIV):
http://www.geocities.com/steve_jarvis_me/Fitment.xls



How much do (insert wheel here) weigh?

http://www.fd3s.net/Reference/wheels.html Has a chart with Aftermarket wheel weights listed by size…

http://www.myalfa156.com/wheels/wheel_by_carmake.html
Has a chart with OEM wheel weights listed by size







Thread links:
widest tire on stock sawblades:
http://www.supraforums.com/forum/showthread.php?s=&threadid=110782
http://www.supraforums.com/forum/showthread.php?s=&threadid=110740


MKIV wheels:
http://www.supraforums.com/forum/showthread.php?s=&threadid=110740

275 tires:
http://www.supraforums.com/forum/showthread.php?s=&threadid=110019
http://www.supraforums.com/forum/showthread.php?s=&threadid=107562

Cobra wheels with 315's:
http://www.supraforums.com/forum/showthread.php?s=&threadid=110040

What offset rims?:
http://www.supraforums.com/forum/showthread.php?s=&threadid=109289
http://www.geocities.com/steve_jarvis_me/Fitment.xls

Rx7 vs MKIV vs 300ZX wheels:
http://www.supraforums.com/forum/showthread.php?s=&threadid=108992

Wheel widths:
http://www.supraforums.com/forum/showthread.php?s=&threadid=108277

[SlowMo]

anyone know if there is a dealer in the USA for "work wheels". its a european wheel company. or does anyone know of how to contact them?

[SupraBadBoyMKIII]

HEY GUY I WAS WONDERING IF ANYBODY CAN TELL ME IF THESE RIMS WOULD FIT without RUBING OR CAUSING ANY DAMAGE.... I KNWO THE STOCK OFFSET IS 37 AND THESE ONE ATE A 27 OFFSET

HERE ARE THE RIMS....

http://www.supraforums.com/forum/showthread.php?s=&threadid=109984

THANKS

[1QwikMK3]

Originally posted by SupraBadBoyMKIII
HEY GUY I WAS WONDERING IF ANYBODY CAN TELL ME IF THESE RIMS WOULD FIT without RUBING OR CAUSING ANY DAMAGE.... I KNWO THE STOCK OFFSET IS 37 AND THESE ONE ATE A 27 OFFSET

HERE ARE THE RIMS....

http://www.supraforums.com/forum/showthread.php?s=&threadid=109984

THANKS

is your car lowered at all?

I think you will be fine... with my 18's w/275's on H&R springs I rub the inner fender liner on front fenders just a bit.. but that is all

[SupraBadBoyMKIII]

yes the car is lowered

these are 17's the only thing im worried about is the 27mm offset
it wont hit the caliper or anything will it?
thanks 1Qwickmk3 :)

[rice-o-matic]

i found this site the other day from my friend.
im not sure if this has already been posted but whatever itll get posted again. go to www.dirtcheaprims.com
at that site you can see various rims on an mk3 supra
along with lower it change the color etc of the car.
over all it is pretty dope. click on "rims" then scroll down
and click on racing harts and then click on one of the rims in there
and click view on car and pick model make etc.
that is the for sure way i know how to get to the car view screen

[CTsupra]

kick ass!...

[SlowMo]

anyone know who make those wheels and a number or site, place who sells them?


http://www.supraforums.com/attachment.php?s=&postid=953684
http://www.fuzebox.org/photos/badassmkiii.jpg

[twinturbozs]

My bro and i were messing around yesterday, we put some Racing Harts on his car with no rubbing. He's running with Tokico springs i believe. Here are the sizes:

Fronts 18x9 (48+?) 265/35/18
Rears 19x10 (50+) 285/30/19


The rears were pretty maxed out, anything with a smaller offset than +45 will probably not work unless you cut the fender. The fronts slighty touch the fenderlining when the wheel is at full lock, but no rubbing is audible on a U-turn. I have some pics if somebody wants to host them.

[a70]

http://supra.f33.com/pics/img/IMG_1722ra.jpg

http://supra.f33.com/pics/img/IMG_1723ra.jpg

http://supra.f33.com/pics/img/IMG_1729ra.jpg

this directory contains them at 50% (IMG_1722r.jpg,IMG_1723r.jpgIMG_1729r.jpg) (http://supra.f33.com/pics/img)

[defylogik]

DAYUM!:bigthumb:

-scott

[supraboy77]

that car is f#cking beautiful i love the paint color and those rims really match the car nicely.

[Zach90Turbo]

NICE! RSP is such a schnazzy color, those wheels look great, too.

[twinturbozs]

yeah he may be updating the body style to a 89+ soon.

[joebugga]

does anyone know if rpo1 18x 9.5 w/ 45 offset, would rub or the rim touch on the inner side? or are spacers used?

running tok and suspension tech.

[twinturbozs]

it should fit no problem if you run a 275 or 285, unless you plan on putting them on the fronts.

[SupraBadBoyMKIII]

hey guys with the follwing wheel sizes what are the best size and largest i can go without rubbing or anything?

front: 17x8.0
rears : 17x9.0

??
thanks guys

[flubyux2]

I looked on that wheel weight page and still wanna know:

What is the Weight of the MA71 5-star 16" rims?

[SlowMo]

are mk3 wheels same lug partern as mk4?

[ma71supraturbo]

Originally posted by SlowMo
are mk3 wheels same lug partern as mk4?

Yes as far as I know all toyota/lexus 5 lug wheels use the same bolt pattern, and is also shared with ford, mazda, and Nissan 5 lug wheels.

[SlowMo]

Originally posted by ma71supraturbo


Yes as far as I know all toyota/lexus 5 lug wheels use the same bolt pattern, and is also shared with ford, mazda, and Nissan 5 lug wheels.


coo thanks

[Nick Stonawski]

Originally posted by SlowMo
anyone know who make those wheels and a number or site, place who sells them?


http://www.supraforums.com/attachment.php?s=&postid=953684
http://www.fuzebox.org/photos/badassmkiii.jpg


Thats Dan(black) and Mikes(blue) car! Both SoCalSupras! :cool: back then both wearing 19" WORK EQUIPS!

[SlowMo]

Originally posted by SupraNick



Thats Dan(black) and Mikes(blue) car! Both SoCalSupras! :cool: back then both wearing 19" WORK EQUIPS!


u know where i could find a set of those?

[Mikado]

eBay sometimes, someone 'round the forums who doesn't want theirs... they're supposed to be getting hard to find..

[HamsMKIV]

You can buy Work wheels from www.bulletproofautomotive.com They are a Work dealer for the US. They also can the more rare SSR JDM wheels like the professors.

One comment I would like to add to this wheel sticky deals with the MKIV 17" wheels. I bought a set shortly after buying my MKIII. I was pleased with the overall look but very displeased with the front offset. I run 245/40's on the front and have rubbing issues at full lock. Also, I personally think they high offset makes them look funny because they sit in so far. I chose to rectify this by purchasing a set of 15mm offset spacers from H&R. This solution worked out very nicely and the wheels sit as 35mm wheel now. They fill in the fender gap and dont look funny at all anymore. I have no rubbing issues anymore at full lock and none under hard compression. I am running H&R springs so I do have a pretty agressive drop. Also, my car wanders a lot less than it used to. I didnt think an offset change would affect suspension geometry that much, but who knows. At any rate, if you buy MKIV wheels, I would suggest at some point to try this mod. If you are weary, go to Pep Boys and buy a cheap set of front spacers to try and see how you like the look. You wont be disappointed, trust me. I personally really like the MKIV wheel look on the MKIII because they are agressive but retain the OEM look. I've always been a proponent of the "Less is More" philosophy so the MKIV wheels are just what I want.

Thanks.

Chris

[prsrcokr]

Can anyone tell me if 17*8.5-40 offset and 17*9.5-38 offset will fit the mk3 (not lowered) without issues?
Thanks,
Brian

[ma70ltd]

2 questions.
1.i'm considering buing these rims http://www.cityjapparts.com/performance-wheel.htm (5th ones down, 18" volk racing)
Just wanted to know if anyone has a set of these on their mkiii, and if so does it look good? pics would be great!!!!
or if your bored photoshop them!(i suck at photoshop).

2.also what is the lowest width you can run on 18"x9.5?

Thanks in advance.

[ma70ltd]

I dont want to post a new thread in hope of replies.
C'mon guys, anyone? (rims are an important decision)

[outofstep]

Most of the initial post's links are long dead. Just an FYI if you want to update the FAQ.

[Old-Skool]

I read through this, but I didn't see the answer to this question: How much do the stock sawblades weigh?

[ma71supraturbo]

The bad SF links were because the threads were made before the server change. I fixed the links though so they should work. If it comes up in any other old thread you dig up -- just add "forum/" after "www.supraforums.com/"

As for the stock wheel weights -- they are listed in one of the weight reduction threads in the FAQ, but you can also see a list of OEM wheel weights here:

http://www.myalfa156.com/wheels/wheel_by_carmake.html

[Cz213]

Well those links in the first post aren't working. Here is a pretty easy question, all TT mkiv rims are the same right? I'm pretty sure they are but I want to make sure.

[ma71supraturbo]

Originally posted by Cz213
Well those links in the first post aren't working. Here is a pretty easy question, all TT mkiv rims are the same right? I'm pretty sure they are but I want to make sure.


Yes and no. Aside from the obvious differences between chromed and not, and the front-to-back differences, there are also casting changes that happened on later model supras. I remember seeing the thread a while back from a guy who ordered a couple new ones and compared them to his older mkiv tt ones. But they all are the same dimensions and will fit.

[Cz213]

Yeah I remember the thread about the new and old type rims, thanks a lot.

[outofstep]

Yes and no. Aside from the obvious differences between chromed and not, and the front-to-back differences, there are also casting changes that happened on later model supras. I remember seeing the thread a while back from a guy who ordered a couple new ones and compared them to his older mkiv tt ones. But they all are the same dimensions and will fit.

Just to tac on abit. I beleive he said the newer version ones were ~2 lbs lighter per rim because of less/diffrent casting material. I'm not realy sure, but I think that's what he said.

[SupraMkiii24]

got quick question, im really bad when it comes to tire and wheels and all them damn numbersso anyways the question is im looking at these rims i can get for a really nice price

17x7's
114.3x5 lug pattern
42 offset

question is how will this offset set the wheel? I read about stock offset but like i said im bad at these numbers and im not sure how to measure them and shit. I'm sorry for my ignorance. can anyone tlel me if they will sit right or be a little in or out of the wheel well.

also what size tires can i run on this i dont know how to tell the numbers as far as to fit a 17x7 rim with the ???/??/17 I want them to sit about stock size (profile lower to compensate for the extra inch size rim) thanks and sorry for my ignorance

[Phoenix Inferno]

So what would the differnce be on 5X100 bolt pattern to the 114.3? i got a set of rims with that bolt pattern and i put on of the rims on my car and it seemed to fit fine?? so whats the differnce and will it cuase problimes?
thanks
-Clint 89T

[BoostIntoOblivion]

Instead of having all the "Will this sized wheels fit with this sized tires" questions, how about we get some answers on what the max is we can fit to end all these questions.:)

With 17's, 18's, etc.
How wide of a wheel can we run?
With what sized tires?
What offset?
With Suspension mods and without.
What are the clearance issues, if any?

[hawkeye]

Originally posted by Phoenix Inferno
So what would the differnce be on 5X100 bolt pattern to the 114.3? i got a set of rims with that bolt pattern and i put on of the rims on my car and it seemed to fit fine?? so whats the differnce and will it cuase problimes?
thanks
-Clint 89T

:wtf: Obviously if you put a 5x100 bolt pattern wheel on a supra, it WASNT a 5x100 wheel. If the bolt pattern is different the wheel doesn't go on.

[outofstep]

Right now my ADR Cyphers 18x10 +35 out back are only on 245 (they came with the rim). I'm dropped about 2 inches on some tein coilovers.

You'll want to roll them if you're dropped at all. Even the 245 are way close to rubbing.

[DTSupra30]

Yo guys im going to buy stock 17"s polished from an mk4 and was wondering if i need to change the sizes for the front??? Any info would be great thanks alot

[Shlongor]

Does anyone know if my "stock" 225/50R16 BFGoodrich T/A VR4s will fit on the 16x8 3rd gen RX7 rims? They have too much tread left to be callously discarded :)

[twinturbozs]

yes they will, those are the same sizes that the rx7 uses too.

[drift into a curb]

You can get Work wheels from Autobacs USA or 5zigen USA. Both authorized dealers for Work wheels. www.importhookup.com has a deal on Works. When I was working at Autobacs, I beat importhookup's prices, but I no longer am with the company, so I doubt they'll still beat prices, but go there and please do some research ahead of time, so you know what you're talking about when you throw out prices.

[Hecksta's Mk3]

Maybe this has been answered, but i couldn't find it. if its been answered just tell me to keep looking. but i was wondering... I'm getting 17" rims and i was wondering what is the best width for them front and back. '86.5 Supra lowered. thanks!

[JonnyRedline]

Originally posted by SlowMo
anyone know who make those wheels and a number or site, place who sells them?


http://www.supraforums.com/attachment.php?s=&postid=953684
http://www.fuzebox.org/photos/badassmkiii.jpg

here are those rims... (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2478164262&category=43957) i think??

[Nick Stonawski]

Originally posted by JonnyRedline
here are those rims... (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2478164262&category=43957) i think??


no those arnt!

Dan's car had 19" Work Equips

[JonnyRedline]

close enough!!! :p

[shrekz]

i almost bought these work wheels but i wasnt sure of the offset, i think i missed out on an excellent deal.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=2477761358&category=43958&sspagename=WDVW

48 offset

[makenzie71]

What's the stock MKIII wheel size?

[fstlane88]

16x7

[makenzie71]

Thanks...couldn't find if they were 7" or 8"


odd...MKIII sawblades are 7", yet my P-Types wheels were 8"....

[Hecksta's Mk3]

hey, i'm looking for the size of the '86.5 mk3 lug nuts. i think its 114.3/ something, but im not sure exactly. i was wondering if someone knew thanks.

[simann]

http://www.first-inc.co.jp/buddyclub/p1r2/images/p12_hg.jpg
http://www.first-inc.co.jp/buddyclub/p1r2/p12img/s15.jpg

On ebay, they have these Buddy Club P2 wheels 17x7.5 for like 600 shipped buy it now.....

I have a 87' supra turbo...and thats way to thin for my taste!

I would like to have some suggestions on offset...

I already now what size I want: 17x8 front and 17x9 rear...

what should the front and rear offset's be? 35 front and 45 rear???

or would it be the opposite way? I am not really that smart about wheel sizing..so help me out here guys and gals...

thanks,

Jonathan;)

[simann]

oh, and i forgot to ask one more thing....

What makes a rim have more of a lip...negative offset wise...would that be the 35mm or 45mm offset...

i am so confused...are both of the numbers "negative" in a sense...the one closer to "zero "0" " being the one with the largest lip on the rim or what???

I asked this because i want a big lip on the rim...maybe 1 inch or so...i am a BIG fan of big lips...only on cars though LMAO :p

thanks,

Jonathan:D=

[simann]

NEVER MIND...i just called up tirerack.com..

Blake told me the offset itself DOES NOT affect the size of lip the rim has....basically the offset makes the hub flange thinner or wider...35-45mm in my choice respectivly.

so you could have 2 17" buddy club P2 wheels side by side...one a 35mm offset and the other 45mm offset and the rim lip would be the same depth..1 inch or so...

its just the rim spokes' hub flange thickness that is thinner or wider to accomodate differnt sized wheel wells...

I GET IT NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

so what offset should i get now? 35mm or 45mm on these?

hmmm:rolleyes:

[suprafly1986]

Would 235/45/17's on 7.5" wheels fit on a stock MK3? How much would you be able to lower the car and it still fit?

[WilLyons]

There's a (currently active) thread in the general section which might be of interest to people looking for wheels. Centered around SSR wheels, but covers fitment.

http://supraforums.com/forum/showthread.php?postid=217266

[bkma71]

anyone got some more websites to looks at wheels... I am looks for some 17x9's which seem to be next to impossible to find..... Is there any problem with running the same width tires in front and back?? I notice lots of people put narrow ones on the front is that just style? cuz I know the stock ones are the same width front and back..

[robmk3]

Originally posted by simann
NEVER MIND...i just called up tirerack.com..

Blake told me the offset itself DOES NOT affect the size of lip the rim has....basically the offset makes the hub flange thinner or wider...35-45mm in my choice respectivly.

so you could have 2 17" buddy club P2 wheels side by side...one a 35mm offset and the other 45mm offset and the rim lip would be the same depth..1 inch or so...

its just the rim spokes' hub flange thickness that is thinner or wider to accomodate differnt sized wheel wells...

I GET IT NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

so what offset should i get now? 35mm or 45mm on these?

hmmm:rolleyes:

I thought the offset had everything to do with the lip...

the offset determins how far inwards or outwards the lugs are placed inside the wheel.

to my understanding 0 is dead center, -30 is 30mms farther to the back of the wheel from center, resulting in a huge lip, and 30 is 30mms farther to the front of the wheel resulting in a small lip.

so deep dish wheels are the result of a negitive offset(Huge lip), a 0 offset(big lip), or a positive offset that is less than half the wheels size(smaller lip).

[rpk2012]

Sorry to ask, but would this work?
Size Offset Hole P.C.D
17x10.0 41 5 114.3


OR, would these work?

Car name Type Conformity Size Offset
ƒX�[ƒvƒ‰ JZA80 Front 42610-SPA52-40 18�~8.5J 40
Rear 42610-SPA72-38 18�~9.5J 38

[QKRTHANU]

I am lookin to buy a set of 16" Super Advans. The ones i found are 16x7 +35 and 16x8 +38. Will these fit a lowered '89 supra and what tires would I want to go w/? Should I try and find some 16x8/16x9s instead?

[ETSUSupra13]

What offset do I need?

HP Racing HPR5:
18x8.5 front
18x9.5 rear

...and also what would be a good tire size?

[87TurboB]

Can someone help me, im thinking of buying some wheels that are 18x8 and i want to run 245/40/18 tires on them. What offset will i need for the mk3? Thanks!

[fstlane88]

15x8 Weld Drag lites, what backspacing do I need to clear stock brakes?

The backspacing sizes Jegs lists are.... 3.5" 4.5" and 5.5"

~Bryan.

[Macleod]

I've got a 98 n/a with a veilside c1 lkit on it and I just got some 255/45zr 18 michelin pilot sport's for it. I had 225/40zr 18 p zero's on it before and liked them,but wanted to try something new. The tires are fine in the rear, however in the front the driver's side tire rubs the plastic on the front fender wall when I turn, but it's not touching the kit itself. Has anyone else had this problem? I am going tomorrow to reduce the tire down to a 245/45zr m.p.s. I can't go any lower in diameter because the kit scrapped really bad with the 40's. The rims are not deep dish. Do you all think that 245/45 in the front is enough to keep it from scratching? Your info is greatly appreciated.

[TheMkIIIProject]

Hey guys, have a question about some rims im looking at. They are 17x8's with a +48 offset. Can someone explain what this +48 offset will mean too my car? In other words can someone tell me what i can expect they will look like on my car? Any information will be appreciated. Thanks.

[Fastway135]

Will 99 celica rims fit an 89 turbo?

http://i22.ebayimg.com/04/i/05/7b/b8/3f_1.JPG

[a_zepeda9236]

anyone know if there is a problem running 5x114.3's?

[EvoLuTioN]

I'm looking at some rims and I was wondering will these be fine?

Style : RS Limited Elite
Size : 17x7
Color : Bronze
PCD : 10H 5x100 / 5x114.3
Offset : +40

[a_zepeda9236]

thats some runny shit.. ohnoes:

[TurBo NiNe T 1]

Ban that kid.

[a_zepeda9236]

my post doesnt make sense anymore.., and that was pretty nasty...ahah

[Hot Dayam SupRa]

im running buddyclubs pI racing II plus
all around 18x8 42 offset
i am running 225x40x18 kuhmo ecsta all around but want to go wider tires and was wondering if this setup will work just fine.
235x45x18 fronts falken rt-615
255x40x18 rear falken rt-615
my car is lowered with bilstein struts with st springs set on the lowest perch and have no rubbing issues at all with the 225' mounted.

here's a pic of it right now
http://myspace-987.vo.llnwd.net/00682/78/96/682486987_l.jpg

[a_zepeda9236]

255 on an 8?... that seems kinda fat

[JSPECMKIII]

If i go with 17x9.5 (Rear) 17x8 (Front)

whats the safest offset i can go if i want deep dish wheels?

[Crash Override]

Thats Dan(black) and Mikes(blue) car! Both SoCalSupras! :cool: back then both wearing 19" WORK EQUIPS!

Here is another pic of Mike's car.

http://img.photobucket.com/albums/v161/Albert12345/Sicksupra2.jpg

[Nick Stonawski]

Here is another pic of Mike's car.

http://img.photobucket.com/albums/v161/Albert12345/Sicksupra2.jpg

bzzzzzzzzzzzzztt!!! wrong!

u even quoted me!!! DANS CAR WAS THE BLACK ONE! :wavey:

[Jaguar]

bzzzzzzzzzzzzztt!!! wrong!

u even quoted me!!! DANS CAR WAS THE BLACK ONE! :wavey:
:urowned:

:lol: :lol: :lol:

[V.I.1JZ]

Im looking at getting some much needed spacers. I found some 5.114.3 ones with a 60.1mm center bore. Whats the center bore stock? Will these fit?

[MidcoMan]

I have a set of 18" polished aluminum wheels and tires off of my 2007 Pontiac Solstice from when I upgraded. They are just laying around not being used and I was hoping I could put them on the Supra. I think the bolt pattern for the Solstice is 5x110 and the Supra is 4.5". Is there a way that I can change the hubs to one with a bolt pattern that will fit, or do they sell an adapter of some sort that would work?

[MidcoMan]

anybody?

[R3N5LOW]

Fitment check.


D2 coilovers.

with 18x9.5 30+ offset

on all corners

Will it fit?

[R3N5LOW]

Nothin?

I wanna know what would fit better

30+ offset or 15+ offset?

still 18x9.5

[R3N5LOW]

Ha

not sucha hot spot for responses over here huh

haha
:(

[wangan91]

with the plus 15 your going to have to roll your fenders if your going to try to have low to no wheel gap. yes +30 18x9.5 will fit

[colpire]

Hey i found these nice work vs-xx's

Bolt pattern 5x114.3
the fronts are 18x9 +22
and the rears are 18x11.5 +18

will they fit or will I have to do any customization? Thanks

[colpire]

no help? :(

[Grosssupra]

Volk GT-7 18x9 and 18x10 weights?

[Cobra_Commander]

Ok, Im about to order a set of CCW Classics for my MK3..

Its lowered, pulled and rolled fenders.

Now, iv had 19x10s (37 offset) and 18x9.5 (22 offset) and they fit. The 18s were perfect.

My question is, what is the lowest offset, but widest rim i can run out back in a 17"? Im goin to order 17" rears, 18" fronts. The fronts will be 9" wide, but id love to do the most aggressive and widest tire out back.

Any insight?

[BuzzBurner]

anyone know if our lug pattern is the same as a mercedes s500?

[Plumba_J]

They are 5x112 if I'm not mistaken. . .

[wangan91]

no. Benz and yota dont match up.

[BuzzBurner]

Gotchya. Thanks