Help! GReddy FMIC install

[Lagtime]

OK, I'm stumped.

How do you re-postition the AC discharge tube with the bracket provided in the kit? It sure looks like Greddy wants you to remove the 10mm nut the holds the 2 halves of the discharge tube together, but I'm worried that it's going to leak, so I'm going no further.

Anyone have any pictures/advice?

TIA

[deavenly1]

SORRY I CAN'T BE OF MUCH HELP CHIP, MY TYPE S IS SMALLER AND DID NOT REQUIRE REMOVALE OF TUBE. I WOULD'NT THINK GREDDY WOULD MAKE THEM THAT WAY, THERE MUST BE A TRICK HOPFULY SOMEONE WILL RESPONED

[Lagtime]

Thanks Mike. Everything else has been straight-forward but the AC line.

The pipes going from the outlet of the IC up to the throttle body won't clear some of the AC lines unless the lines are moved.