TT Calipers question

[impactX]

Will the MKIV Supra TT front calipers bolt onto a 2000 Solara front using the same bracket [Bracket A + Bracket B] (assuming I am using Supra TT front rotors already and I have a bracket [Bracket B] to move my stock 1 piston caliper to clear the bigger Supra TT rotors)?

Bracket A Picture:
http://members.shaw.ca/impactx/bracketa.jpg

Bracket B Picture:
http://members.shaw.ca/impactx/bracketb.jpg

Basically, the Supra TT's rotors' offset is the same as the Solara's.
This is the site of the guy who created the bracket to fit MKIV Supra TT rotors on the front of a Gen 1 Solara:
http://members.cox.net/solara/brakes

Do you know if Supra TT 4 pot calipers will bolt up to [Bracket B]? Also, do you know if the banjo bolt of the Solara can bolt up to the 4-pot caliper? If everything fits, what do I need other than the 2 calipers?

Sorry for the long questions. If it works, I am going to get the calipers and rotors from you guys.

[Curt Aigner]

What is the span between the center of the two bracket holes:scratch:

[impactX]

Let me find out, I will get back to you.

Thanks very much Curt!!

[Curt Aigner]

ok............

[impactX]

I got the measurement.

The diameter of the hole is around 1.1mm.
The distance between the center of the 2 holes are around 15.9mm.

Thanks Curt!

[Curt Aigner]

Originally posted by impactX
I got the measurement.

The diameter of the hole is around 1.1mm.
The distance between the center of the 2 holes are around 15.9mm.

Thanks Curt!


Those measurments are incorrect. what kind of ruler are you using?

I come up with appox 117mm between the centers.