PDA

View Full Version : Need help with installation


McGregory
06-19-2005, 08:36 PM
OK. Here it is, but....

http://www.mkiv.de/uploads/forendateien/McGregory/turboumbau/atwork/DSC00444_KLEIN.jpg

... i will still runing MAF at mom. Where i have to install the "original" MAF Sensor?

http://www.mkiv.com/techarticles/parts/maf/dsc00101_small.jpg

The intake Pipe is 5 ", too big. Maybe after the turbo, between Turbo and FMIC Pipe ?

........

My next question is, where i have to install the steelpipes?
To connect it with the BC would be nice, but is not urgently at moment.

I think, that the pipe from the compression housing (2b) is going to the Wastgate and the other one (2a) from the middle pipe of the black box one, with the 3 pipes.

http://www.mkiv.de/uploads/forendateien/McGregory/turboumbau/atwork/DSC00451_KLEIN.jpg


Sorry, for my poor english and my newbie know how, but i hope, you can help me.
8secsupra
06-22-2005, 07:47 PM
I think we got this sorted out by email, let me know if you need anything else!

Thanks
JH
McGregory
06-25-2005, 06:24 PM
Yes, thank you for the competent help.

Yesterday i´ve installed the FMIC, but its not finished yet. Have to relocate the OilCooler.

Today i get my EGR Block plates and will install them next days.
Also i have to install the HKS Racing BOV and connect some pipes.

Now i am waiting for the ECU MAP and the Harness and if everything is running fine, i will style the complete engine bay.

BTW: The PHR Kit is fantastic, everything fits 100% and was installed complette in less than 2 hours.

http://www.mkiv.de/uploads/forendateien/McGregory/turboumbau/atwork/DSC00475_KLEIN.jpg
Toro34
07-01-2005, 02:56 PM
i would like to know where these hoses go...

the oone with the yellow end goes to MBC correct?
the one off the front of the compressor housing to the wastegate?

i also have a large vac line(hose) that i have left over.. what is that for?
8secsupra
07-01-2005, 03:03 PM
i would like to know where these hoses go...

the oone with the yellow end goes to MBC correct?
the one off the front of the compressor housing to the wastegate?

i also have a large vac line(hose) that i have left over.. what is that for?

Email me directly with these questions for faster service.

The yellow end goes from the wastegate to the electronic boost controller "out" port.

The Compressor housing line goes to the other WG port.

The large vac line, I have no idea what you mean by that.

Thanks
JH
Toro34
07-01-2005, 03:52 PM
it looks like it would be a hose from the pcv to maybe the intake?

i put the small k and n breather on the left(closer to turbo) cam cover nipple
Toro34
07-01-2005, 03:58 PM
i will get some better pics of my engine bay and email them to u asap
McGregory
07-20-2005, 04:21 PM
Hi Jarrett,

the car is running fine. With your help it was easy to install. Now the Map has to been tuned by a professional, but the PHR 550 Map ist ok, too.. even for for your poor american fuel :D

Here i´ve posted some pics and a vid of my car.
http://www.supraforums.com/forum/showthread.php?t=299504

Thanks
Greg