Can't take the drivetrain out. Help!

[iiiankiii]

Damn, I hate this shit. I can't to do anything right. Ok, I took out the bolts and the center bearing mount. The book said to push the front part of the driveshaft towards the front of the car and slide it out from the back. I did this but the damn driveshaft won't move. Am I doing something wrong? Let me know. Thanks. I really need help. I'm trying to pull it right now.

[1QwikMK3]

If you have unbolted the center bearing and unbolted the driveshaft from the differential then it should slide right out of the transmission...that is all that holds it.

[tsupra]

on mine i had to push the center ujoint to one side of the car to get it off the tranny. also, make sure you have a small plastic bag and some rubber bands handy when it does come off the tranny.

[Kingsoup]

Like he said, unbolt the 4 (14mm?) bolt from the Differential and the two big bolt from the center bearing support and you should be able to just pull the driveshaft out.

--------------------------------------
88 Supra Turbo

[bigdough666]

When I had all the bolts out of the carrier bearing and the U-joints, the driveshaft was still attached to the differential. I had to tap it with a hammer (notice I said TAP) to break it loose, then it pulls right out.