PHR 3.5" Driveshaft for SC300 w/ 2jzgte twin turbo swaps

[Bryan@PHR]

PHR is proud to offer our 3.5" one-piece driveshaft. We consider this driveshaft, without a doubt, the best available. Our driveshaft is rated at 1000rwhp but has been known to hold up to over 1200hp on even the most agressive drag launches. We use 1350 U-joints for ultimate strength. Our CNC billet steel rear flange, and CNC billet aluminum front adapter are precision machined for perfect fitment. Even out 12.9 grade bolts are the best available. We are the ONLY company to offer a billet rear flange, making this the best driveshaft on the market...period.

One of the advantages our driveshaft has for street use is the retention of the factory rear flex disc. This dramatically improves street driving and reduces vibration.

Available for 6spd or automatic twin turbo.

http://www.powerhouseracing.com/images/product/large/4577_1_.jpg
http://www.powerhouseracing.com/images/product/large/4577_2_.jpg
http://www.powerhouseracing.com/images/product/large/4577_3_.jpg
http://www.powerhouseracing.com/images/product/large/4577_4_.jpg
http://www.powerhouseracing.com/images/product/large/4577_5_.jpg

Click here to order (http://www.powerhouseracing.com/p-4577-phr-35-driveshaft-for-sc300-w-2jzgte-twin-turbo-swaps.aspx)

[dima126]

i have a 97sc300 with a 2jzgte and an r154 transmission now, im swapping in a V160 this fall, and will be using a gs430 rear diff with a trd lsd with the v160, will this driveshaft bolt up from the 6 speed trans to the gs430 rear diff?

[Bryan@PHR]

i have a 97sc300 with a 2jzgte and an r154 transmission now, im swapping in a V160 this fall, and will be using a gs430 rear diff with a trd lsd with the v160, will this driveshaft bolt up from the 6 speed trans to the gs430 rear diff?

Yes it will

[dima126]

do you have this in stock? what would be the best shipped price you could do for me? to 60073

[Bryan@PHR]

Built to order, about 3 days. Best price shipped is $930.

[dima126]

i will be ordering one in a few weeks for sure :)

[dima126]

will this also work if i use the 6 speed rear diff?

[Flicktitty]

Any idea if this will work (or can work) on a GTE Swapped GS300?

[Bryan@PHR]

Any idea if this will work (or can work) on a GTE Swapped GS300?
They are different lengths, but I can still do it. Same cost. Will have to get some measurements from you

[Bryan@PHR]

will this also work if i use the 6 speed rear diff?

Yes, it will

[dima126]

Review:
Just wanted to post a small review about this driveshaft that i purchased from you guys.
i installed it on my sc300 with a v160 and a 6-speed TT rear diff. i cannot say how great this product is
it is a a bolt on deal, everything fit like a glove, the quality and beyond amazing, there is zero vibration
at speeds of 0-100mph (have not went faster then that so far) but im sure it is great after that also. I also wanted
to thank you guys for such a quick turn around on this.

[dynosaur]

Thanks for your positive comment dima126. These driveshafts have been very popular since they came out.

[pass1914]

will this fit a soarer R154 with the stock rear diff. or jza80 rear diff ?