For technical information about modifications/repairs to NA Supras.
First off its a 93 supra. The transmission took a dump. After doing some research on here went with a w58 from a Lexus cause it was there and for a good price. The problem I ran into was that the mounts for the tripod are not on the back casing of the transmission from the Lexus. So I am wondering...
I know there are tons of posts about flywheels. I've been looking for a couple weeks with really no luck with my questions. Is the flywheel in a non turbo MKIV Supra with the factory w58 a solid or dual mass flywheel? From what I have found the IS300 with w55 has a dual mass flywheel and the tt...
Feels great its a world of a difference....for the price its unbeatable. I paid: Calipers w/pads & brake line - $150.00 Rotors - $75.00 Brake Fluid - $1.99 Turned Rotors - $21.00 Out with the old:
I've searched with litte luck for New Motor Mounts for my 98. I've called shops and no one seems to have an answer. I've ordered 98 motormounts from worldpac and they didn't fit. Where can I get motor mounts besides paying for oem ones ? I'd rather go poly or solid but at this point ill take...
a few months ago i boght a 2jzge block and head only no pullys throttle body etc. ive decided to buy a mk3 supra for the 2jz ive been told tht a gte head wth a ge block was fine.can someone tell me how much a stock tt,intake,pullys,etc would cost
First and for most, I have searched everywhere on the forums and other sites that could possibly answer my question, but seems like everyone has a different issue other than what I'm experiencing. To start off, I am TT swapped but still on NA brakes. About 3 days ago, I noticed a weird...
I installed a new odometer, thinking it was the cold solder problem, but my auto is still shifting erractically. I wanted to located the speed sensor connection to check if its loose or corroded but I can't located it. Does anyone have pics? or can tell me how to trace it to find it? To...
So I bought a pearl white sc300 that already had a swap done to it. when I picked it up it took several tries to start but eventually would start and shortly after would die. I purchased the car because it was blowing oil thru the turbo (no oil restriction). As you can see from my username, I...
I own a 93 MKIV with high miles so i want to upgrade the Rears calipers to TT size, I already upgraded the fronts.I recently blew one of my rear calipers, I was wondering if the rear calipers of of any Lexus will fit, I also noticed the JDM Aristo calipers look identical front and rear????, the ...
Hello, I plan on boosting the supra this year and im always focusing on maintaining the optimum temps for the water and oil. My question is, can an oil cooler decrease the oil pressure to a dangerous amount ? I know there are thermostat sandwich plates how ever once it opens i believe the...
I was looking for specs on the stock is300 intake cam. I know the guys with the JDM turbo engines swap out for the USDM intake cam. I am running a vvti gte and was wondering if the is300 stock intake cam would be an upgrade? Thanks!
Well i finally have time to sit down and type out the how to on blocking you egr gases from entering your intake manifold. thus cooling the intake charge and keeping your engine internals cleaner. And along with taking the EGR pipe that blocks the flow of air inside intake manfiold removing it will...
close thread. found issue
well i did a compresion test on my 95 n/a. 2 cylinders read 175 , 2 read 160 wich is the minimum it should read according to the shop i had it tested at,, and 2 read 155. they said it was still ok just usual wear and tear for a 173,xxx mile car. what do u guys think? is 155 still ok or am i a few...
I checked my power steering fluid today for the hell of it and it smelled pretty burned up. How do I go about flushing the system? Any write-ups?
93 jdm supra 2jzge / auto , stock . Ive been haveing some wiered electrical problems , came across this splice , was hoping someone could tell me why the last owner would do that ? pink wires off ecu , splicing into black /red/ w silver dots ( splice ponit beside the driver side seat in...
Hi everyone, My name is Henrique and I'm a Portuguese living in Dubai. I found a semi abandoned 95 supra non turbo on the street covered in dust and managed to find the owner and asked him if he wants to sell it. He said yes so I went to have a look sat the car and found the following: -car...
I am looking to replace an igniter in my 96 JDM Supra SZ-R. The part number shown on the igniter right now is 89621-26010. Yet much of the information I find seems to suggest that 89621-33010 is the correct part number. Is 26010 required for JDM? or should I get the 33010?
My car recently sat for about 2 months while I was in between radiators and wheels. I've known my stems seals are bad because of smoking when I start moving from a stop etc. But once I got the coolant system all back together and went to start her up it would take quite a few cranks to fire up. And...
As stated swapped out with known good parts and codes still there
So i was troubleshooting my 5spd with my auto ecu both cars are NA. I pulled the ecu out of the Automatic and it ran perfect in the 5spd. I then reinstalled the ecu back in the Automatic and it runs great. I drove home and when i left later at night the car made it 2 blocks down the street...
Quick detailed video on 2jz-ge Oil change. Please add my channel and share as you see fit. http://youtu.be/J1YXx3bU9S4
This is from my boosted IS300 as I have not attained a Supra as of yet. Please share my channel and video's as you see fit. Positive feedback always applies - Thanks Spock http://youtu.be/W6NL4nwLbLs
Yea just so as the title states, my odometer seems to not to be working at all completely. will not clock up or anything. does anyone have any advice on what the problem could be?? thanks guys
Hey all. Looks like its time for a new rear main seal, so I'm going to go ahead and replace my 80k mile old Centerforce stage 1 while I'm at it. I'm considering a few options, and will not be making more than 300 ft/lbs. My options are: South Bend Stage 2 daily - Seems like a good...
i think my starter is going bad sometimes when i try to start it up it just clicks. you guys think i need to replace it or just new starter contacts
What's up guys. Alright, well for the past few months, I've been having this oil leak problem but just never got around to solving the issue but I feel like its time to get down to it. Even though I will be doing a TT swap within the next few months, I really need to solve this issue. So, heres the...
As the title says. Im fitting an active front spoiler next weekend, my car has the wiring just under the right side headlight so it "shouldn't" be a problem. I've done a search on here for a guide to fitting this set up but im not having much luck. Has anyone else done this? is there a "how to"...
so i was driving this morning to my office and had a yellow goin red traffic light in front of me....so i accelerated pretty hard to jut make it. all of the sudden i noticed the the caution sign on the gauge cluster went on and also the CEL !?!?!?! i was like wtf....i couldn't turn around or park...
Hey whats up guys this is Ant from Brooklyn ny I purchased a 92 Lexus sc300 this past July when I got the car it stumbled really bad upon start up and gave off a strong odor of gas, I came to realize that I had two bad fuel injectors #4 & 5. I changed the fuel injectors did a compression test...
Curious as to what would be a good AFR for an n/a. I have mine set at 12.5 right now via safc.
like the title says i'm curious as to what the normal/average vacuum is on a completely stock 2jzge. by stock i mean no cams, no injectors and only a different exhaust and air filter intake. after warming up mine makes about 22 in/Hg at idle and i'm curious as to if that's normal or low or high...
just want to know which rear shoes (for the e-brake) i need after switching from NA to TT calipers??? or are these the same anyways?
As stated in the title, i cant seem to find the pinouts for the 98 na ecu anywhere on here. I have the factory service manuals, but they are for a 95 which does me no good because my car has the n/a vvti engine... HELP...thanks!!! Eric
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
