For frequently asked questions about NA Supras.
NA to TT Engine Swap
WE GOT THIS STICKIED !!! So no one should keep asking, HOW or WHAT DO I NEED, ETC. ETC.
TO SEE THE PICS .. CLICK THE BLUE UNDERLINED LINKS
Id just like to start of by saying that this swap is not that hard to perform, however it is more time consuming that...
First off im going to go ahead and ask if this thread could be stickied as with the other useful information because i belive that many people are going to be taking this route from now on and it will answer most if not any of the question that people might have: and now for the long...
TURBO INSTALLATION GUIDE:
--This is a guide for the installation of a turbo kit on a MKIV Supra NA
--Some year model NA’s may need to modify this guide
--This is a basic guide for those running basic turbo kits; i.e., this is a guide to install the minimum components for low level...
This swap will work for all mkiv NA Supra’s and SC300’s.
If you want to make this a sticky, then go for it!!
Ok, since I seem to get asked the difference’s or the “how to” swap in a JDM 2JZ-GTE into my NA mkiv, I decided to do a write up on it. I will also list the average prices that I have...
I just thought I'd post this up on here since it was a gigantic help in redoing some of my vacuum lines since my underhood diagram was hard to read.
Hope this helps some people!
ok just lookin for some stright foward direction. i know its all here but im lookin for the basic gte sawp help , lookin to just sawp in a gte enigin in to a na 5spd supra , its a jspec engine ...i also have all my na engine parts n plan on useing the oil pan set up[ n mounts...so any direct...
Probably one of the most frequently asked questions is the difference between the 2JZ-GE and the 2JZ-GTE block to which the answer is oil squirters.
First it's important to understand where the oil squirters are.
Inside the block below the pistons.
Second it's important to understand...
Hello supra forum users I curently have ran in to a problem. I have a fully stock 2jz gte vvti with stock harness stock ecu and I need a maf sensor can I use a 2jz ge vvti maf sensor? Because right know my car doesnt go into boost it brakes up at about 3500rpm will this solve my problem because we...
I am thinking doing a tt on mine nat I want to be at 600 hp
I plan on doing a 2j auto swap in my cress in about a month or so but where my problem stands is the tail of the 2j auto tranny. I was thinking that since the 1j are found in the Jzx90 I can swap the 1j tranny onto the 2j motor. I'm trying to keep my stock driveshaft. But the question I'm asking is...
ive heard they were the same and i heard they were different. can anyone confirm? i have bypassed the fuel pump ecu but do i really need a new pump for my swap
im aiming for around 500whp NA-T.
will a piggyback do the job? or will i have to go aem?
why so ?
hey guys...just starting to save up for a NA to NA-T conversion and was wondering how much the average guy spends (assume work will be done in a shop) getting their car to a daily drivable (300-350hp) turbo, just for mods under the the hood, nothing else. Realize this is a pretty broad question so...
OK here it is.I have an 1986.5 7m-ge supra.I was diving home the other day shut off car for 20 min when I restsrted car it had a bad miss like a cylinder down drove it home and shut it off.Next morning when the car was cold started it had no miss.Ran it 30 miles no problems let car sit 30 min and...
I'm goin to NA-T my JDM 97' supra AT and need some help from experienced people like you.
My 2JZ-GE has only about 30k miles on it. :)
I'm aiming for ~550rwhp
I want to get AEM EMS V2 for my NA-T. My concern is, can I still drive the car normally on daily basis? And is it reliable to go that route? Thank you!
What is the best type of nitrous to run on a supra? Wet or Dry system? Also why run 2 bottles of nitous? If you ran 2 bottles would both be spraying at the same time or would one by for somthing else? example, mayb for spraying the intercooler. Lastly what are the benifits to spraying the...
hey guys i've been searching for this for a few days now with no real results.. so i apologize if this comes up a lot.. but, how much does a 2JZ-GE engine go for on here?
I'm turboing a 2jzge pretty soon and I want to know if these aftermarket T4 flanges manifolds for a 2jzgte will work? Or do I have to find one for a 2jzge?
Additionally, is there a 2jzge manifold with a ct26 flange?
Ok, i got my hands on an 86.5 mk3 5 spd, 7mge, and I'm having problems with the tems suspension system. I have disconnected all four tems, but everytime I press on the brake pedal or even when im changing gears all my tems light up and my engines try's to turn off on me. Is there any way I can...
anyone have any ideas where i can find some parts need a Exhaust and downpipes and a single turbo want to conver from tt to a single one .
Ok guys, Im a honda guy but have had no luck identifying this turbo. It is a RHC7 T4 exhaust housing with no markings for A/R on either of the housings. Here is the serial info on it:
Turbo Spec. CI56 9501
Serial No. RHC7 24 004C
Parts No. 1144002100
I was going to measure the...
iv got a supra2jz 1993 model we just gave it a full rebilled had 12thogh taken off the block head shaved new gaskets and and seals new timeing belt and fan belt clened the pistons new rings put it together and now it back fieres misses soundes like a roten commodoor over heats and blows blue/black...
okay so last night i was trying to figure out how to remove this thing. i removed the four bolts on the inside by the pedal, but there is still a bracket attached to it with a bolt behind the bracket that needs to come off before the brake booster can be removed. the bracket looks like is connects...
Hi i have a supra 93 tt and i have a problem with the lights. When the engine is on lights wont work if the engine is off lights are on anyone have a clue ? thank you
Ok, i've been looking and was wondering which companies to order from and which not to when ordering my JDM engine. Please let me know about your past experiences with the company you ordered from as I plan to order a TT engine some time soon.
Anybody know the difference between the two rads? Is one bigger than the other
Hey im looking for wheels like work meister s1 3 piece or some ssr professer sp1's if any body has a pair of them let me know plz verry interested in them. Thanks!!!
i just got a boost controller and i would like to konw how much boost can i run in a standed 2jzgte engine
title says everything. just looking for power numbers??
I know I'm kind of going out on a limb but I thought this might be a good place to start. Pardon my n00bishness.
I'm looking for a fun, inexpensive daily driver. I've been into Subarus but since I'm out of college and off my parents payroll my sense has kicked in and now I'm looking to downsize...
I've been looking around and can't seem to find out how many 93.5 supra NA s were made in color code 202(blk). Also if anyone knows hpw many SE s were made in black as well it would be greatly appriciated.
well just got out of the integra thing and bought a 93 na auto supra. i going to either buy a 2jzgte motor and 6 speed trans and do the conversion but its not enough power that way. does it pay to buy the swap and then add a single turbo and new mainifoild and new intake,injectors,valve spring and...
i have an aristo 2jz-gte in my 240sx that i just purchased the bcc for. i followed all the instructions to a ''t'', icluding the voltage adjustment/test which went well. i hooked up the white wire on the bcc to the black wire with two yellow stripes(right on the ecu harness) to the tps side. i...
tonight i have to cut off my inj plugs and wire in the rc engineering inj clips
does polarity matter or is one positive and one negative
if polarity does matter can someone tell me which is which
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.