For general discussion about topics relating to the MKIV.
For technical information about modifications/repairs to the MKIV.
AEM E85 gauge 5.7-11.9??
Today 11:51 AM
For frequently asked questions about the MKIV.
Wiring Loom Repair
Today 03:09 PM
It is my hope that this thread can serve as a solid reference point for anyone with questions regarding the various differentials installed in the JZA80.
This is a 'master list' of the factory installed differential configurations offered in the Supra in the US & Japan.
Anyone with further...
U.S. MKIV Supra Roll Call...NO BS/No Chat/No More/No Less...
Photo (optional but preferred)
I am making this post for people who have questions about FACTORY repair problems or issues with their cars. This post is not here to ask questions about aftermarket problems such as VPC wiring ETC but to help you solve or fix a problem right the first time or advice. Make a post and ill answer...
I would like to see some close up pics of rolled or cut rear fenders. Interested in the end result whether it was done by a shop or a DIY job. :) thanks. :)
searched..and no luck.
First off, I have searched many times and the forums keeps messing up and showing blank white pages (already reported by other members here: http://www.supraforums.com/forum/showthread.php?t=501894)
First off I want to go ahead and ask you guys who are running RPS clutches (non C/C) if you are...
I figured that people with 1997-98 years might appreciate having these. They are a little different than the ones here for the 1995. Big difference is Electrical. Some minor Body and other stuff. Not sure about SRS, SFI, and ABS/Traction. I also have nothing here for NA cars (sorry) That requires...
I am documenting my crank walk experience for you guys. I also have questions for you at the end of this thread.
GTE Bottom End
Occured after about two years of driving with this clutch. I tried to get it off the road in time but the last mile home was terrible. I also did...
I am creating this thread to try and gain an understanding of whats involved when properly "degreeing" HKS camshafts to our beloved 2JZ-GTE engine. I want to attempt to do this on my engine but I need to have 100% confidence in what I am doing because I have a interference engine I do not want to...
Supra forum's Guide For Noobs.
*The majority of the below information was taken directly from Corner-Carvers.com...another outstanding automotive forum.
-Use the search function BEFORE you post a question. We don't like rehashing a subject that was discussed just last week, last month, or a...
NEW-1997-98 Complete Service Manuals by Stu Hagen
FULL 1995 Supra TSRM and Wiring Diagrams
Current draw on battery
D.I.Y. Air box
Engine Build Thread...***Pics Inside***
Any posts that contain questions that could have been answered by a SEARCH and/or the FAQ will be closed or deleted!
Thanks for searching.
I have a supra 6 speed. Os Giken Quad disc clutch. This set up has never given me an issue. Used it for years. Now all of a sudden, sat over winter(in heated garage), I went to install it back into the car after pulling the engine to re-do a few things and now the starter wont engage into the teeth...
Anyone know anything about FRS's cast manifold turbo kit for $2800?? I have read nothing but top notch reviews regarding these guys and am curious about this kit as I am interested.
As many of you know I have great appreciation for the Supra especially the MKIV as it has always been one of my dream cars come true. I purchased my MKIV in September of 2006. I wanted to attend my first SILV in it in 2006, a good year for SILV as it was a big attendance. Although it was a rough...
Hello Supra Forums
I have a bit of an issue that the car started doing a few weeks back and wanted to get your input just to make sure Iím headed in the right direction.
Below are some of the mods the car has.
Stock motor 2jzgte
Pte 6266 turbo
Has anyone installed one to their stock twins setup?
Would the install be the same on a JDM Supra TT such as mine.
After installed, how did you setup the 2 different pre-set boost settings?
Than you for the help guy's.
Any suggestions on how to fix this? I'm looking into dent pullers now, but what about the cracked piece? How do you match the textured finish when repairing this?
Well I have been gathering parts for the last 1.5 years to convert my SC3 to single turbo, standalone ems and etc. I kept changing my mind on setups, which I am still not to clear on what I'm doing about the fuel. The shops are too busy and too much $$, I have a guy that knows this like the back...
Long story short trying to get NYS to recognize the Supra as a car allowed to have historical plates. In NYS the car must be 25 years old OR Some vehicles that are less than 25 years old and have unique characteristics can qualify for a historical registration. The DMV determines if the vehicle has...
Im stuck on what cams I want to get, Im right @ low 5XXwhp and My power goals are Mid 6xxwhp eventually.
I want GSC S1's but am schetched out by them being interference cams. my friend says go hks 272s and I will feel the power better and they are not interference cams. I like GSC cams keep...
No matter how good my 4" exhaust may sound, sometimes I get tired of it when on long drives, and would like to explore a few tried/true ways to make it silent for the times when I just want to take a long cruise.
My car is running a 4" BL DP/MP all the way back to an HKS carbon TI...
I just recently switched to E85 and was wondering if the oil change intervals are any different. I have heard some different opinions on this subject. Can anyone shed some light on this? I am still on a stock motor and am running 10w30 synthetic oil and toyota tundra filter. Thanks
My dash is splitting appart near the front vents towards the windshield! Anyone else have or had this problem? How to fix? I will get pics up soon.
I did a 6spd swap during the winter and wanted a TRD tach to replace the auto tach with the gear indicators but couldnt justify the cost. So I looked at the OEM tach and got to thinking, why dont just point the OEM needle downwards TRD tach style and get some custom overlays. So I found an UK based...
I'm having a hard time finding where to buy a replacement set of HKS Super Drager gaskets, if they are even available anymore. Has anyone ever had to replace theirs? Is RTV a good substitute to use or will it eventually leak?
Can someone give me a breakdown of the 5 wires that plug into the fuel tank wiring connector? I'm running an external pump so I'd like to remove any wires going into the tank that aren't necessary for the fuel gauge and warning light.
Check it out!
DISCLAIMER FOR WHINER NEWBIES: Some of this information reposted from MKIV.COM with clarification and better diagrams. In other words, I borrowed from 3 different articles that were all somewhat confusing, modified the existing pictures, and reposted everything here..I also added information that...
Titan Motorsports has developed this bolt in rollbar for the 93-98 Toyota Supra. Produced from 1.75ď 4130 Chomoly,this roll bar is 100% bolt in and requires no modification to the vehicle and is compatible with both targa and hardtop models. The base plates of this durable roll bar are produced...
Well I'm looking for a cheaper clutch alternative since I sold my RPS triple so i can free up some funds to get the car on the road.
The 3 clutches that I'm considering are the Southbend, WOTM/AZ and the HPF Feramic. I will drive the car to and from work at least 2x a week even in the winter. I...
Well I just came across supra store looking for different manifolds to fit a large frame BW Turbos. Anyone use this manifold? Seems new....its on their home page. I know about the supra store history but I was concerned with the manifold and anyone with any kind of experience with it...thats all......
Just picked up my supra and the alternator died. I'm away from home and all the automotive places say it'll be 3 days for an alternator. Any ideas? They said they can have an auto alternator tomorrow. Will that work with out any modding? In Clarksville, TN
I finally got to my favorite project of building a Supra for road racing (SCCA ITR). Which year Supra would you guys recommend, 96 hardtop?
This is a non turbo version, so I'm looking for a Supra with the stiffest chassis, and best engine combination out of factory.
Before I begin, I'd like to mention that my supra is a JDM MKIV, with what seems to be a "piggyback" ECU by TOM's. I also tried searching the forums for the info., and found a couple of threads, but they really didn't answer my question.
So, now on to my issue-
I have a 94 JDM...
Our Carbon Fiber Shafts are a bit different, due to the fact that we have decided to take our time and offer what we feel is the best shaft that we could make. Before we come out with a new product we will take the time to investigate, research and put our own spin on what's currently being done....
I've tried a search, and I know that SFS does the T28 upgrade. But I need input on good turbo shops that can do a rebuild of two stock USDM twins. (I want them stock not upgraded)
I have bought them from a guy here and he recommends me to do a rebuild since they've got 70k miles on them.
Have this setup fitted to my own supra and wondering if anyone on here is using the same setup in their supras?
What kind of results did ye get on the dyno etc
Any videos or pics of your setup would be appreciated
How do you rate the T51 setup?
What would one have to do to be able to mount the OEM DP/cats to a PTE turbo? Is there enough room to add an adapter plate?
I will be very interested to learn, since I don't know where the solution lies, between easy or impossible.
Please excuse me for my ignorance, but why is there such a high demand for Ross Machine Intake manifolds?
Are they much better than lets say Hypertune or VWR? i dont know much about them so i was just trying to get some insight on this.
Which is the most OEM lookish gauge holder? Is there some gauge holder you can hide in the glove box or something you can integrate in the dash board very sleak?
I hate to rice out the interior of my car. I like it OEM.
I have a 1997 6sp, approx 65,000 on the odo; TTC, Greddy 3-row intercooler, BCC, cat-less downpipe (not sure of diameter, but it's at least 3"), Apexi GT spec exhaust, K&N style air filter, Hallman MBC and Defi boost gauge.
I installed the MBC a couple years ago, and everything worked great; it'd...
Hello, I was messing around with dressing up the engine by replacing the hoses. There were two hoses that were wrapped up together. I went to pull one off but they both came out and when I replaced them I was unsure if it was right or needs to go the other way. See pic. The bottom two valves are...
I just finished reinstalling my engine after pulling it to paint the bay and to build the head. After dropping it in and reattaching everything I got to turn it over and first it was very slow so I changed the battery. Next it seemed to be cranking fine and then it fired I ran it for about 15-20...
Ive heard from different people that I need IACV, but the car was built wout one. How can you tune to where you dont need it. Or should I spend the money and try to get one on my FFIM?? SO confused on this topic.
I have a 93 supra twin turbo. i can turn on the car fine. but the trac light and engine light comes on.
i check the oil levels on tranny and engine. check water level as well. After i checked all that. i turn on the car again and it moved fine. i drove a block then came to a red light. thats when...
I bought a used Greddy 3 row intercooler and came with these hard pipes (see photo). Does anyone know if i can use the stock IC soft pipes with these hardpipes, buy a trans cooler to re-run the power steering cooler lines currently in front of the radiator, buy the '03 honda civic coolant overflow...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.