Have a testimonial about a shop??Need advice on which parts to buy?
You have to be a very patient person if you want to bring your car to them. It takes them a while to do something, giving you all kinds of excuses and at times do not even know what the hell they are doing. And make sure your blood pressure and cholesterol is good when you get your bill so you...
Good morning, I just wanted to let everyone know that we are having a Fathers Day sale going on right now! As long as you have payment in by 6/26/2009 then you can enjoy 10% off your entire order with us! As always here at Mirror Finish Polishing all of our Metal Polishing is Guaranteed to a...
Hello all :) just to make things a little better here and avoid mis-understandings This section is to only be about Your own personal experiences with a company/shop or with a part you have delt with directly. Some (not all) people like to repeat what they are told from others inperson or on...
Who: www.emspowered.com, Baktash Taghehchian is the guy that runs/owns it. Phone: 1 (512) 686-2800 Fax: 1 (512) 236-5168 f/b: http://www.facebook.com/baktasht shop's f/b: http://www.facebook.com/pages/EMSPoweredcom/302612211222?sk=info Where: 11400 Old Lockhart Hwy
I have a 2jz in my 95 s14 with a s366 ,1050 cc injectors ,haltech sp2000 . Once I finished the swap I ran it at 15 psi no issues at all ! I started to up the boost towards 20-22psi and had some break up .. Gapped plugs to .22 and still same issue. So I bought a hks dli brand new !! still did...
I normally don't take the time to do this but these guys were so great to deal with that I feel that it's the least I can do. I dropped my car off with Peter 2 Fridays ago at 5pm after spending the last year fixing and re doing the car from the previous owner.(it was supposed to only need a tune) I...
I have the opportunity to purchase a new Seibon TS style hood, which is my absolute favorite style. Since I was previously the owner of what was supposed to be a high quality fiberglass vented hood (genuine Veilside) and was hugely disappointed with the fender gaps, I just want to get a final...
I wanted to give these parts a bit of a shout out. Cam gears are usually regarded as a pretty engine bay ornament without much by way of functionality; the oft-repeated advice (admittedly on much higher power setups than my own ~800rhwp) is to leave them zeroed. Until today, I would have agreed...
I'm looking to buy a ridox body kit, anybody know where I can find one,besides eBay?
Cliffnotes: -Sold Supra needed a toy i can daily. -Picked up a super clean s14. -M&S dropped in the secret weapon (also weapon of choice). -Alpha from IP sprinkled some fairy dust on the haltech. -Met hp goals on pump, surpassed goal on E85. -Car is "a little ridiculous" <--Alpha's quote. ...
WELL with so many choices to make now in ECU'S for our supras from AEM ,MOTEC, HKS FCON, MAP ECU ,Greddy ect....., im wondering what everyone is using now? so pick what you have in the poll and tell us how you feel so far about it:wavey: .
Member whom have a RPS Carbon/Carbon Clutch can you post your feed back on how well or how bad the unit is doing ? just posting this to help others out.
I'm about to switch my synapse wastegate to something else. The precision 46mm is #1 in my choice list. However, I read on the facebook Supra parts for sale group, a few guys mentioned how it hardly opens up? Really? Anyone with experience with this wastegate please let me know what you think!...
hi what are all the differences between the 11 bladed borg warner S366 and the normal 7 blade S366? i guess the 11 blade is billet? does that mean it makes more power? how much? earlier spool up? how much? of course given the same sized exhaust housing. i also heard that the turbo whine...
this guy is a total rip off. so please be aware of him and his shop. i am going to go over this again. seeing how the gods of SF seem to erase things that just don't seem to sit right with them. i thought this site was for the community of supra lovers but nope. any ways here we go again. list...
Seeing the following bill, I would HIGHLY NOT RECOMMEND this place to anyone for any work let alone tuning. First thing's first. I didn't pay for this but rather the person I bought the car from. I bought this car for pretty cheap considering what was included with the car and what it is....
Has anyone here installed a genuine RMM carbonfiber wing on their car recently not the ebay one? I recently recieved my second wing since the first one was damaged during shipping, and this wing fits like it was not even made for the mkiv. It does not contour to the shape of the mkiv hatch or...
This is more so a sound comparison vs. Specs.. I know the hks t51r is laggier and both kai and spl will probably make more power than a borg warner s366. I know the s366 makes a pretty loud, high pitched whistle also? Similar to the hks t51r?
Anybody use the 1 piece HD Driveshaft Shop driveshaft for the 6 speed? I've been searching on Driveshaft Shop threads, but most are 3 or 4 years old or more and are prior to when the HD 1 piece came out. I'd like to get some current information on the latest Driveshaft Shop products, as the...
Went back to TPS so Errol could update my ProEFI with all the new fancy goodies. And while I was there we made a bit more power too lol. Just like last time, the moment I walked into the shop I felt like family. They treated me as if I had know them for years.They day went something like this: ...
t51r KAI or the SPL? or is it exactly the same? does BB version make any difference in sound? thx :)
I am considering changing to a modified oil pump and was wondering who to go with? I have heard a lot about SP and PHR. Need your suggestions?
This started out as a simple size comparison but I let it snowball a little bit. There's some good information here now! Be sure to note the variance between voltage that the pumps were measured at. I've had at least one of these pumps in my car over the years. I put a Walbro 255lph in the car...
I would like to thank Weldcraft Wheels for doing a phenomenal job on widening my stock TT wheels they look amazing! the welds are spot on and beautiful. I didn't take much pics before I put the tires on since I only had an Iphone camera (which sucks). However, I do have pics with the tires mounted...
Most of you guys already know "exvelocity" here on the forums, but I wanted to post this because he really went out of his way on my car. http://www.facebook.com/ELITECUSTOMBODY Stefan painted my 1994 Supra, added a Euro hood scoop and recovered my dried out leather with new leather -w-...
http://www.supraforums.com/forum/showthread.php?677621-Please-return-my-calls-or-emails&p=8877749&viewfull=1#post8877749Sorry it took a while to get back to this, I just received the re-built 4L80E today from Jake's Performance and hopefully this is the end of my troubles with the 4L80E. These are...
Just wanted to give my review on my inline6performance fuel hanger. I got the dual walbro 400's with the e85 connections. Sent my stock hanger and another one was shipped within a day. Quick service, good price and good product. Fit like a charm. Im running a -10 feed and -8 return...
I wanted to give the SE forum my impressions of a recent experience with Force Fed Performance. Cliffs version: Very knowledgeable and friendly staff. Even though they appear to deal mostly with some nasty Evos, they have tuned plenty of 2J cars- BPU to large singles. NO nonsensical 'shop...
Curious to see if anybody has bought from this site. They are by far the cheapest place to buy KW coilovers, by almost $500 cheaper. Model number matches what MVP sells and everything. http://www.gripmotorsports.com/kw
I just wanted to let everyone know how nice of a product this is. They have done all the engineering for you so swapping your OEM master for the Tilton master is plug and play. If you are considering this swap I can recommend it and if you decide to do it you are crazy not to get the twins setup...
I searched to see if there was already a thread pertaining to this, but found none. The main reason I was motivated to start this is I am currently having my 95 Supra shipped to me by a Stateway Auto Transport, who I have recently found in very bad reputation and my personal experience is showing...
I'd like to start by saying this rant came about after dealing with both sides of the fence. The guys that STAND BEHIND their products deserve credit and respect for what they are able to do. AMEN Brothers! My Money is on it's way!:biglaugh: *MOST IMPORTANT PART - Go To The Vendor Section and...
Hey ppl, I'd like to use this thread to gather everyones first hand experience with the ebay exhaust manifolds. By most accounts the manifolds for the 2jz have been pretty well made with few reports of cracking/breaking so far. If you have one of these manifolds, PLEASE POST A REPLY with...
I've had a set of CCW LM20's for over 3 years and just discovered that I had a crack on the edge of the inner lip on one of my rears. I don't remember hitting anything specific but the roads around here are not good. Called up CCW and talked to John and he sent me a new inner barrel free of...
Hey Guys, I recently purchased boost labs borg warner turbos and still havent had any confirmation from them about my purchase. I've tried calling them over the last couple of days and sent a few emails. I spoke to Ryan on Monday and sent the payment that same day. Not sure if the whole Boston...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
