Want to make that Supra shine? Discuss it here!
post pics of your supras w/ a side profile of your ride w/ wheels this should help those trying to get a picture of what they are looking for etc edit: Originally Posted by SupraSonic What also would be helpful, would be to show wheel widths, offsets, and tire sizes.
Here's another GREAT write-up by another member. Here's a link on how to change the light in the keyhole door handle (I think it's only for the older models): I MUST INSIST NO ONE EMAILS OR PM ME REGARDING ANYTHING LEDS!!!
For those who have pulled or done more than usual rear fender mods (not WB), what size wheel you run out back & offset ? I'm well aware of 11.5" rears fitting w some cutting/rolling but wanting to see what was out there that was 12" I know the back spacing will be somewhat standard so the rest...
So apparently toyota is out of stock on these forever but this company has them available! http://toyota.spx.com/detail.aspx?id=407&p=173&g=21 just placed my order- $10.90 plus shipping :). Call the 800-933-8335 number, press one, then one, then give the rep the part number...
I did a search on modifying these lips but only found a couple of threads talking about doing it with some photos of those that had done it. I saw a few people had just cut the sides off and left it at that, which looks ok from a distance. Others had the over hang where the lip extends past the end...
1) Go to Auto Zone. Get 2 cans of GUNK CITRUS 2 STEP CLEANER/DETAILER. http://www.gunk.com/msds/CEB1.PDF 2) Get a plastic shopping bag (Assuming all of you have a aftermarket intake.) 3) Let the engine get totally cool and dry. Cover the intake with the plastic bag and apply the GUNK 2...
Hey guys. I've been signed up on this forum for a while, but I've yet to make a worthwhile contribution to this forum. So, since I like body kits (not all of them), I figured I can contribute something I know a little about. I've made a list of all of the body kits for the MKIV Supra. ...
I was suprised to see that there was not a thread on painting a car so I am making this for those out there that are sick of being charged a ton to have it done. It is a lot of work but well worth it in the end. Trust me on this, if you do all the work and paint it yourself you will appriciate it...
Okay everybody, it has been suggested many times that we have an official thread dedicated to High Intensity Discharge/Xenon related issues. This thread will serve as the focal point of all your non-halogen questions, comments, and so on. Lately, there have been a few members here that have done...
Don't be lazy. If you quote someone, take the extra time to delete the photo links. a) We already saw them. b) It slows the website down. c) It makes scrolling down the page to read new posts a pain in the ass. If you quote photos, your post will be deleted. Then you will be mad at the...
First, thanks to Julien (Zorglub) for being bold enough to be the first to do the swap and with the helpful responses that enabled me to do this swap. This swap, however will include paddle shifting, phone/voice buttons, as well as a Rolling Antilag button that is already so conveniently placed at...
So I ordered some new wheels and they are here and on the car. They are 3 Piece True Forged Decades. 18x10 +47 F with a 275/35/18 and 18x11.5 +50 R with 305/35/18 Mickey Thompsons. The wheels are awesome quality and the customer service was great! True forged also have a jacking pad that straddles...
Has anyone ever anodized their short shifter black or had it black chromed? I have he B&M short shifter and was thinking of adding the MVP shifter knob but would prefer them both to be black. Any ideas?
I think it'd be a great idea to have a thread to have a reference point by. I'm having a hard time finding clean pictures of a specific LED color. I'm sure others have too. My idea is to have a quick accessible variation outline so it's easier to compare and choose. If you can, please take a...
Hi, I've been thinking about getting a body kit and wanted to get some SF members opinions... I've always liked the TRD Widebody kit, but since I saw the Trial rear bumper I just fell in love with it, especially when it is coupled with over fenders. It just gives off a great aggressive look. ...
Does anyone know what the wheels in the front are? Thanks!
I've seen a lot of exotic cars wrapped in vinyl in recent years and it seems like they are always matte grey or black and quite a few in carbon fiber. I'm not a huge fan of those colors but it got me curious about wrapping my car in a gloss black. The same color as it's original paint. My...
hey, i need a little help thinking up a clever license plate name to put on my 94 TT BPU. any suggestions???
Got a few sets of headlights to refinish for couple of members,spent about 4 hours last night opening them up and cleaning the sealer off the lenses and out of the grove in the housings,prepped and painted some inserts today,tomorrow will be doing the rest of the inserts and prepping/clearing all...
Hey guys, So the paint to one of the side pieces to my RMM wing started cracking and has completely pealed off in a couple spots. At first I thought water was just getting under the paint, but went to take it off, and when I got one of the bolts off from inside the hatch, water poured out... ...
As the title says, I have a company who is interested in replicating the AeroMagic/Whifbitz Supra lip in poly urethane (CF Version will be made as well). I want to see how many people are interested so I can pass on this info to the company to see if it would be worth their time. It is the same...
Just curious to see pictures of this before i pull the trigger. thanks Jon
Does anyone know who makes this lip? I've seen a couple floating around, on the M&S cars and one or two other SF member cars, but as far as I can tell, no one has yet offered a replica of the Whifbitz lip (?)
Hey guys, i recently bought my supra in February, the car is all original and in MINT condition. I'm looking for a professional wax and detail for my car near Palm Beach, Florida. Does anyone have any recommendations? Thanks!
Hi all, I'm swapping to manual and the 6 speed interior panel I got is pretty rough. What brand/paint matches the 97/98 grayish interior color best? thanks!
I needed traction and a wheel I could drive and not really care about. I opted for stock TT wheels for extra sidewall (compared to 19" wheels) with a stealth appearance. The neanderthal tire shop tech used some sort of acid or dissolve agent on the old wheel weights. This left a stain shown in...
Good evening all, I am posting because I was faced with an interesting dilema. My 93.5's dash panels were showing a little wear that really pained me. They weren't entirely noticeable unless the car's roof was off and in direct sunlight. The only panels that really show any wear are the shifter...
My supra is flat white and I have debated the idea of buying carbon fenders from MVP. My general rule of thumb has been if you are going to do carbon on a car it has to balance out from front/back. It would be nice to see more pictures of supras rocking the carbon fenders unpainted, it would...
I was wondering if anyone had a pic of his gauges the one that was custom made with a 220mph I think speedo. I used to have it but can't seem to find it anywhere. Thanks guys
i know its not straight black, has anyone taken the time to match it? thanks jon
I've been searching for new wheels for my MKIV and the Forgestar F14s have turned up time and time again. The first time I saw them the price was unbelievable for the set. I found this thread on my350z.com and it really made me think twice about going down this route. ...
hey guys just had questions does anyone knows if there is any generic or somewhat close to Whifbitz front bumper ........I really want this bumper soon but mvp cannot give nay time estimate........and I am going with close to do luck style ............any suggestions.................
I got interested after finding out these name-brand, quality, strong, and lightweight rims don't cost $800 a piece like many other worthwile sets. Been doing a lot of reading on sizing, offsets etc etc, and ran across this post by Nick_95_6SPD, which made me nervous: "Caliper clearance really...
i have tinted front windows and i live in NH... i have heard there are ways to have it legally... i have had the tint for almost a year and i just got called out on it but i didnt get a ticket, just a warning that someone could give me a ticket for it... i have heard that if you have an eye...
so i was just browsing the web searching for some varrstoen wheels on supras and found this pic here since i like how they fit i would like to know if someone know anything about these wheels (size, offset etc.) and if they clear TT calipers
What's up guys just thought I would throw up today's project. Trying to get some feedback and stuff from what and how other people have done this. im waiting on my replacement parts for my tein coilovers im still doing other little stuff here and there. I was looking at the SpeedForSale glovebox...
Hey I am looking for some interior pieces for my 94 Jdm supra can anyone help?
does anyone know anyone that can make some for us? i contacted adam at revlimiter.net but he says hes booked up for months. Just wondering if anyone knew anyone. Thanks
should I go pearl white or keep it OEM super white? I'm leaning toward OEM white since engine bay won't match...
Has anyone been able to fix the plastic gear that strips in the drivers power seat? You have to buy the whole motor/track assembly and its very expensive. My motor works just won't move back or forth because of the stripped plastic gear. I've taken it apart so I know the problem but you can't...
Has anyone with a 93-96 Supra has ever tried installing the grill fins from the 97-98 Supra? I picked up a front grill for 97-98 Supra today, have not tried to install it yet, seems like drilling the bumper is required:(
I was wondering if anyone has ordered seat covers from Interior Innovations ? http://interior-innovations.com/demo_site/index.php/welcome/product_detail/37 Full set in Leather, no vinyl, for 700USD. LSC charges 1200 for full leather Owner claims that his product will fit better and is...
I am at that point in the road where pure performance is just not enough for me. I feel the interior of the car is aging. At a time where interior of cars are just getting so cool and since we spend our time inside the car, that is important to me. I was wondering what you guys do to your car to...
I was looking on ebay today and came across this front lip. I have not seen this lip before does anyone have it on there cars. ...
My SPECS: Offset unknown 18x10F & 17x11.5R CCW Classic Wheels 285/30/18 BFG GForce T/A KD Front Tires 315/35/17 BFG GForce T/A KD Rear Tires I have told everyone who has PM'd me that I'd go 18 front and 18 rear if I could do it again. Mostly for looks.
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
