TRD Widebody or ...?

[RossM]

The first pic with the red supra is not a trd widebody back end. Its a doluck type 1 rear bumper.

I don't believe that's what the OP was trying to say and the rear bumper is a trial rear bumper and not a doluck type 1. I personally like the TRD my self but my only gripe with the TRD kit is that it actually shortens the car in the rear by about 2-3 inches so in the end your car is wider and shorter.

[Hatem]

The first pic with the red supra is not a trd widebody back end. Its a doluck type 1 rear bumper.

Do-Luck & Trial both have a very similar rear bumper.
However the Do-Luck rear bumper has much thicker skirts than the Trial rear.

[turbodunn97supra]

I don't believe that's what the OP was trying to say and the rear bumper is a trial rear bumper and not a doluck type 1. I personally like the TRD my self but my only gripe with the TRD kit is that it actually shortens the car in the rear by about 2-3 inches so in the end your car is wider and shorter.

No, the rear bumper on the TRD sticks out the same distance as stock.

[RossM]

No, the rear bumper on the TRD sticks out the same distance as stock.

I have a MVP/TRD Kit on my own car before I swaped out the rear bumper for the OEM one. You can actually look at your car as a prime example, have you ever wondered why your exhaust tip sticks out of the rear bumper more than usual ?
http://farm6.static.flickr.com/5217/...cf459bf0_o.jpg
http://farm5.static.flickr.com/4116/...0063aa5a_o.jpg
http://farm6.static.flickr.com/5258/...4962b82c_o.jpg
While normally the Apexi N1 exhaust just barely sticks past the rear OEM bumper?
http://www.mkiv.com/techarticles/exh..._n1/index.html

This is another example of how most TRD rear bumper seem shorter than the OEM ones
http://www.supraforums.com/forum/sho...light=widebody
http://www.cardomain.com/ride/266541/1994-toyota-supra

HKS Titanium
http://i205.photobucket.com/albums/b...supramy011.jpg

HKS Titanium
http://www.mkiv.com/techarticles/exh...m/ff4e4e4c.jpg

[turbodunn97supra]

I have a MVP/TRD Kit on my own car before I swaped out the rear bumper for the OEM one. You can actually look at your car as a prime example, have you ever wondered why your exhaust tip stick out of the rear bumper more than usual ?
http://farm6.static.flickr.com/5217/...cf459bf0_o.jpg
http://farm5.static.flickr.com/4116/...0063aa5a_o.jpg
http://farm6.static.flickr.com/5258/...4962b82c_o.jpg
While the normally the Apexi N1 exhaust just barely stick past the rear OEM bumper?
http://www.mkiv.com/techarticles/exh..._n1/index.html

This is another example of how most TRD rear bumper seem shorter than the OEM ones
http://www.supraforums.com/forum/sho...light=widebody
http://www.cardomain.com/ride/266541/1994-toyota-supra

HKS Titanium
http://i205.photobucket.com/albums/b...supramy011.jpg

HKS Titanium
http://www.mkiv.com/techarticles/exh...m/ff4e4e4c.jpg

That is compelling. I've owned both and they look the same to me. I'll put a stock Supra up next to mine and see when I have a chance.

[SupraGodTT]

That looks sick !! I would do something different with the rear overfenders. Probably the TRD rear fender weld in.

[Hatem]

I'd really like to go with the following look:

- Trial rear bumper (CF wrapping for diffuser)
- TRD widebody fenders (front & rear)
- Veilside overfenders
- Do-Luck type 2 side skirts
- Do-Luck type 2 front bumper
- Seibon hood TS-II
- 19" CCW 505a

Can the Veilside overfenders be welded into the TRD widebody fenders?
Wld I have to modify the Do-Luck type 2 side skirts as well?
Also can the Trial rear bumper & the Do-Luck type 2 front bumper be modified to properly fit the TRD fenders?

If all of the above can be done, I wld have to have all those modifications done before shipping to Lebanon.
Who wld u recommend? Wld appreciate if u cld point out reputable body shops...

Thx


Hatem

[T66Dawg]

No, the rear bumper on the TRD sticks out the same distance as stock.

The TRD rear bumper is definitely shorter than the stock bumper (I actually would like the TRD rear bumper a little more if it was a little longer, maybe in between stock and what it is)

My vote is for a TRD WB but I too am biased:

[ERICPAOLA]

The TRD rear bumper is definitely shorter than the stock bumper (I actually would like the TRD rear bumper a little more if it was a little longer, maybe in between stock and what it is)

My vote is for a TRD WB but I too am biased:

^^^^ this mans are is one of the cars that made me want a Supra ever since i seen it in Modified Such a Perfect car

[T66Dawg]

^^^^ this mans are is one of the cars that made me want a Supra ever since i seen it in Modified Such a Perfect car

Thanks for the compliment!

[Khano]

T66Dawg, do you have a build thread? Or anywhere i can look at more pic's of your car? Haha Thanks

[T66Dawg]

T66Dawg, do you have a build thread? Or anywhere i can look at more pic's of your car? Haha Thanks

Not to hijack the thread (hope the OP is cool with this since he is looking at doing a TRD WB kit)

No build thread but here some threads with pics (one of them has pics of the new brake setup, Stoptechs)

http://www.supraforums.com/forum/sho...&highlight=TRD

http://www.supraforums.com/forum/sho...&highlight=TRD

[exvelocity]

Veilside overfenders are fiberglass,not steel,just as TRD panels,so they can not be welded. But they can be molded together. If side skirts are not from TRD widebody kit, they will require extensive glass work,as well as the Trial rear bumper and Do-Luck front bumper. None of these parts will just bolt up,all of them will need to be cut and widened for proper fitment. And I would also like to point out,unless you're buying genuine parts that were made in Japan, they all will need work for nice fit and finish. Let me know when you're ready.

I'd really like to go with the following look:

- Trial rear bumper (CF wrapping for diffuser)
- TRD widebody fenders (front & rear)
- Veilside overfenders
- Do-Luck type 2 side skirts
- Do-Luck type 2 front bumper
- Seibon hood TS-II
- 19" CCW 505a

Can the Veilside overfenders be welded into the TRD widebody fenders?
Wld I have to modify the Do-Luck type 2 side skirts as well?
Also can the Trial rear bumper & the Do-Luck type 2 front bumper be modified to properly fit the TRD fenders?

If all of the above can be done, I wld have to have all those modifications done before shipping to Lebanon.
Who wld u recommend? Wld appreciate if u cld point out reputable body shops...

Thx


Hatem

[Khano]

Not to hijack the thread (hope the OP is cool with this since he is looking at doing a TRD WB kit)

No build thread but here some threads with pics (one of them has pics of the new brake setup, Stoptechs)

http://www.supraforums.com/forum/sho...&highlight=TRD

http://www.supraforums.com/forum/sho...&highlight=TRD

Thanks for the links! I'm trying to decide on a wide body right now and your car is very convincing ahahah. My only down fall is TRD is Fiber glass and i was hoping to stay away from that. I work in a Auto body shop and after a few years now i know how easy it can crack/spiderweb

[XCELR8]

It's possible to do both the TRD widebody and trial rear bumper in a seamless way.

[Hatem]

T66Dawg, of course I don't mind! Ur car is beautiful!

exvelocity, thx for ur reply! U have PM

[Khano]

Hatem did you decide on what you're going with?

[D3vious]

TRD ftw!

[Khano]

TRD ftw!

I know i want to!! Fiberglass ftl tho

[D3vious]

http://

http://

http://

I am biased as well...

[Dynomite]

I would love to do TRD rear with Ridox front

[Supraboy21]

Trd always looks the best to me but I like bein different and everyone gets the trd

[dosturbo]

Amazing car D3vious. Just stared at that second picture for like ten minutes. Is it Lexus smokey granite mica? I wanted to paint with it after my dad got his SGM GS350. Great color!

[D3vious]

Yeah it is Smokey Granite Mica. Matches my 08 GS350,lol.

[black 2jz]

trd wide body with a different front bumper