Canadian builds and projects

[GeoffCame]

Hey all.
Thought it would be a good idea and a good read to see what everyone's doing for a build / spring update.
So post up what you've done or are doing to get the supra ready for summer or your current projects

[2jz_fanatic]

Should have my turbo shipped in a week, buying the new engine as soon as my tax return is in, already have a few goodies sitting on the side... And am looking into a gte short block on the side... What about you.

Jordan.

[Timbo]

Cars in the paint shop right now getting the shine ridox kit put on. My carbon ti exhaust, cam gears and light weight pulleys should arrive any day now. The tax return has just increased the timeline on my single turbo f1 manifold kit by 2 months by the end of the summer it should be a somewhat serious supra

[isifmobile]

6266, torque converter, AEM v2, walbro 400, AEM water/meth and cleaning up wiring/plumbing. Not a supra, but I have supra parts.

[Tayousei]

I have a build thread up. Basically a 3.2L stroker, BW 60mm airwerks turbo, kool coated/ported cast manifold with Tial MVR WG, fully built head with bronze guides/GSC S1 cams/GSC beehive springs and retainers/supertech inconel valves/shimless buckets, ETS 4" black anodized FMIC, Titan S2 tranny, Titan 3500 stall, remote Setrab oil/tranny coolers with integrated fans, all new new pumps and sensors, OS Giken dif. There's a bunch more but that's why I made a thread, lol. I'm gonna be busy :S

[MIX]

Swapping out my HKS Carbon Ti exhaust for the HKS Ti 4". Hoping to hit 900 RWHP on the dyno with this mod alone (from 858 RWHP).

[GeoffCame]

Throw up links to build threads also.
Im doing a piece by piece tt swap with a GE block. Im still waiting on a bunch of parts. Built head, ProEFI, Fuel system for E85, Hypertune 102mm, IS300 Fan shroud kit from PHR with a koyo rad, some misc bottom end parts that will probably just collect dust until I build the bottom ( custom wiseco 10:1 pistons and carillo HD H beam rods ), titan cam gears, Titan balancer, SP billet timing tensioner and oil pump. Still have to order coils, plugs and ignition from local toyota. Have everything but the fuel disconnected in the bay then I'll pull the motor and start when I get all that from SP

[Danny T]

I'm doing EVERYTHING at the moment.

Car is pretty much stripped (full build going on). Hopefully will be done by mid summer.

[2HIGH~PSI]

Swapping out my HKS Carbon Ti exhaust for the HKS Ti 4". Hoping to hit 900 RWHP on the dyno with this mod alone (from 858 RWHP).

I still want your wheels haha

[MIX]

I still want your wheels haha

They're mine, I tell you! ALL MINE!! lol....

[GeoffCame]

what's your plans Danny?

[2jz_fanatic]

Here is my thread please comment and subscribe should have updates really soon

http://www.supraforums.com/forum/sho...ap.&highlight=

Jordan.

[Hukhuksupra]

what's your plans Danny?

Put his 1000rwhp basement into the garage...haha.

[residence1]

Have a set of ccw classics in the mail with kumho tires 315 30 18 rears and 265 35 18 fronts, also from sp I have tial waste gat bov both purple in transit right now along with 6266 polished and heat coatd turbo, precision 1200 injectors, pro efi package, oil feed kit, aero motive fpr, can gauge arp head studs and a few other miscilanious parts all be here by next week hoping to finish my build by July

[residence1]

Oh yeah forgot to mention I also have ordered but is back ordered first state motorsports intake mani, fuel rail and rmr throttle body

[GeoffCame]

Put his 1000rwhp basement into the garage...haha.

Details man details!

[GeoffCame]

Have a set of ccw classics in the mail with kumho tires 315 30 18 rears and 265 35 18 fronts, also from sp I have tial waste gat bov both purple in transit right now along with 6266 polished and heat coatd turbo, precision 1200 injectors, pro efi package, oil feed kit, aero motive fpr, can gauge arp head studs and a few other miscilanious parts all be here by next week hoping to finish my build by July

Nice, Those are some fat ass tires lol pulled, cut or rolled fenders?
Who do you plan on tuning it with the ProEFI?

[residence1]

Fenders will be either rolled or cut likely cut since I don't have the Eastwood tool to roll nor do I know anyone with one. And for tuning I got Larry from sound performance to throw a base map in for me. So I can start the car and throw it on a trailer and tow to sound performance once my build is complete.

[87supramario]

I have a plan, to make a plan - need to find a 1jz flywheel to compression test this 1jzgte engine to get for my swap.

For now just gathering parts to build the car in one shot. Not going big like most others here :P Just going to be stock but upgraded off the bat to be my daily dd.

I can't wait to dust off my ol' build thread!

[403 Supra]

my NA is going 6sp GTE right now

[MKIValex]

Did the GTE swap in my NA with FMIC, BOV and some other goodies. Waiting on my Work S1R wheels to come in. And possibly doing a V160 soon

[87toysupratt]

Putting the finishing touches on my auto to r154 with Marlin crawler parts swapped in.

[GeoffCame]

Fenders will be either rolled or cut likely cut since I don't have the Eastwood tool to roll nor do I know anyone with one. And for tuning I got Larry from sound performance to throw a base map in for me. So I can start the car and throw it on a trailer and tow to sound performance once my build is complete.

I'm going the same route when it comes time to tune

[JamesTheJames]

http://www.supraforums.com/forum/sho...t-Winter-Build

[Danny T]

Put his 1000rwhp basement into the garage...haha.

LOL. No shit.....10 years in the making :P

Advice - dont get married and have kids before you build your car.....build your car first......LOL

Plans In Progress:

Single Turbo/Full motor/head build
rebuild tranny
big fuel system (e85 compatible)
Pro EFI complete pkg and flex fuel
Lots of custom parts courtesy of my brother - TooPrecise Machine Inc
Bunch of cosmetic/chassis stiffening updates (HID's, signals, titan solid mounts etc etc)