I have a 45mm Omori electronic boost gauge and was wondering if anyone else had one. My issue that it reads +2 psi with accessories on and the engine off. Anyone have this problem or know a fix for it?
Here's a link to the gauge for reference:
http://www.j-spectuning.com/product_...bb688a23212683
i have heard about these gauges reading a bit off when in the accessory position from my time on NASIOC. you can actually talk to the guys from J Spec about it, they are aware of it and will tell you that it is not an issue, as, supposedly it will be accurate when functioning with the car running. i also know of people who have asked them to replace it and have done so.
Thanks. I'll do some searching there on the subject. I really think the gauge is reading incorrectly while running as well. I run on a 7lb spring yet the gauge will peak at 9psi. I doubt its a coincidence but you never know.
Actual picture for reference.
Heres my mechanical one under normal operation..hope this helps
edit jeesh my video is in HD... shows every piece of dust on my dash
Posting Permissions
Reply With Quote
Originally Posted by nissangtr10
