HKS intercooler install components

SupraMan1990 · 10-11-2009, 08:34 PM

Dusty, any chance you could get just the install hardware for the HKS intercooler kit for my 87 turbo? I bought it used from a gentleman, and all he sent me was the intercooler, piping, clamps, and couplings. Really hoping you can use your pull at HKS to get this stuff.

Robert@MVP · 10-12-2009, 05:40 PM

Let me email HKS and see what they can do for us!

Regards,
Robert

SupraMan1990 · 10-12-2009, 10:07 PM

Robert, do you ever sleep? Seems like your always doing Dusty's slave labor

. Let me know as soon as you hear from them, as if I can't get something I'll have to make my own I suppose.

Robert@MVP · 10-13-2009, 09:10 AM

LMAO on occasion but all of us here at MVP enjoy our jobs so it's not uncommon for us to be here till midnight if not later on some nights(by choice mind you). All a part of having the best customer service in the industry!

I am still awaiting HKS's reply which should be in within another 2-3 hours once they open.

Regards,
Robert

V8 Killer · 10-13-2009, 03:17 PM

Quote:

Originally Posted by SupraMan1990

Robert, do you ever sleep? Seems like your always doing Dusty's slave labor

.

Oh come on now! Robert just does the MK3 and N/A sales, and has for the last couple of years.

Not my fault you can't read our website which plainly explains that.

Best,

Dusty

Robert@MVP · 10-13-2009, 04:15 PM

Email reply from HKS, if you could pm me your email address I will send you the sheet to circle what you are needing:

Robert,
Attached is a parts list that your customer can use to spec out nuts and bolts. Since this is a kit that is manufactured ONLY for HKS USA, the other parts such as brackets and pipes are near impossible to get unless we order a production run. These are parts that we normally do not stock in the US or in Japan. ETA for individual items listed that are specific to the kit would be in the area of 3-4 months with a minimum quantity purchase of 10 units per part #. If your customer really needs them, please circle the parts that you need and return it to us as the part #’s listed are no longer used.
I would really recommend that your customer try to get the brackets back from whomever he purchased it from as we are not talking about $ 15-20 parts. It could get really expensive.

Thanks,
HKS USA

SupraMan1990 · 10-15-2009, 12:24 PM

Quote:

Originally Posted by V8 Killer

Oh come on now! Robert just does the MK3 and N/A sales, and has for the last couple of years.

Not my fault you can't read our website which plainly explains that.

Best,

Dusty

Why do I have to go to the site when you employ fine people such as Robert that allow me to just post here Dusty.

10-11-2009, 08:34 PM	#1
SupraMan1990 87 MKIII under the knife Join Date: Jan 2005 Location: Hickory area, North Carolina Age: 20 Posts: 1,620	HKS intercooler install components Dusty, any chance you could get just the install hardware for the HKS intercooler kit for my 87 turbo? I bought it used from a gentleman, and all he sent me was the intercooler, piping, clamps, and couplings. Really hoping you can use your pull at HKS to get this stuff. __________________ 87 NA/Auto to Turbo/5Spd Current: HKS Intercooler and hard pipes, Aermotive AFPR, Fidanza flywheel, DS shop aluminum DS, K&N intake,3 In. LIPP turbo elbow, 3in stainless turbo back exhaust, HKS TEMS controller. On the Shelf: AEM Cam Gears, AEM Wideband, Greddy EGT gauge, Greddy Boost gauge, 89+ molding and tails. Future plans: SAFC, HKS boost controller, 60-1 CT26, 550CC injectors, Lexus AFM, HKS turbo timer.

10-12-2009, 10:07 PM	#3
SupraMan1990 87 MKIII under the knife Join Date: Jan 2005 Location: Hickory area, North Carolina Age: 20 Posts: 1,620	Robert, do you ever sleep? Seems like your always doing Dusty's slave labor . Let me know as soon as you hear from them, as if I can't get something I'll have to make my own I suppose. __________________ 87 NA/Auto to Turbo/5Spd Current: HKS Intercooler and hard pipes, Aermotive AFPR, Fidanza flywheel, DS shop aluminum DS, K&N intake,3 In. LIPP turbo elbow, 3in stainless turbo back exhaust, HKS TEMS controller. On the Shelf: AEM Cam Gears, AEM Wideband, Greddy EGT gauge, Greddy Boost gauge, 89+ molding and tails. Future plans: SAFC, HKS boost controller, 60-1 CT26, 550CC injectors, Lexus AFM, HKS turbo timer.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-12-2009, 05:40 PM	#2
Robert@MVP MVP Motorsports Join Date: Jan 2004 Location: Bridgeport Age: 23 Posts: 669	Let me email HKS and see what they can do for us! Regards, Robert

10-13-2009, 09:10 AM	#4
Robert@MVP MVP Motorsports Join Date: Jan 2004 Location: Bridgeport Age: 23 Posts: 669	LMAO on occasion but all of us here at MVP enjoy our jobs so it's not uncommon for us to be here till midnight if not later on some nights(by choice mind you). All a part of having the best customer service in the industry! I am still awaiting HKS's reply which should be in within another 2-3 hours once they open. Regards, Robert

10-13-2009, 04:15 PM	#6
Robert@MVP MVP Motorsports Join Date: Jan 2004 Location: Bridgeport Age: 23 Posts: 669	Email reply from HKS, if you could pm me your email address I will send you the sheet to circle what you are needing: Robert, Attached is a parts list that your customer can use to spec out nuts and bolts. Since this is a kit that is manufactured ONLY for HKS USA, the other parts such as brackets and pipes are near impossible to get unless we order a production run. These are parts that we normally do not stock in the US or in Japan. ETA for individual items listed that are specific to the kit would be in the area of 3-4 months with a minimum quantity purchase of 10 units per part #. If your customer really needs them, please circle the parts that you need and return it to us as the part #’s listed are no longer used. I would really recommend that your customer try to get the brackets back from whomever he purchased it from as we are not talking about $ 15-20 parts. It could get really expensive. Thanks, HKS USA