Supra Forums banner

Removing wiring harness

3K views 8 replies 5 participants last post by  redwind 
#1 ·
So I have a 1jz swap currently and i bought a 2jz but I'm trying to remove the wiring harness and I'm having trouble pulling it, what's the best way and tips for removing the wiring harness? Should I remove the intake manifold? Please help I would like to get this swap done at a decent rate lol
 
#5 ·
I already have the plugs off from the motor.
If it's disconnected from the motor, why not just leave it in the car and bungee cord it out of the way of the motor?

I know on the MKIV, it was easier to leave the harness in the car and remove the intake manifold to unplug the hidden connectors.

Al
 
#9 ·
sounds like you need to pull the whole dash, thats not the normal route to run the harness, someone put a hole in the fire wall to tuck the harness
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top