I am having a few different brake system issues. Not sure if they are related or not but I will explain what has been happening.
I am getting a ABS code 61. I followed the procedures in the TSRM and nothing seems to really help. Because of this I don't have abs. But the weird part is I don't have any lights on the dash.
I do have Proefi installed and removed the Trac ecu that is in the passenger footwell. But this seems to be a normal part of the procedure so this shouldn't have caused any issues.
I also have 3 wheel speed sensors wired to the ABS for the Proefi traction control, as well as 3 wires wired to the Trac ecu plug to use the Trac indicator, Trac On/off button, and light.
I still have the factory trac actuator pump in the car.
I have a new OEM rotors, Hawk HPS front pads, and oem rear pads, and stainless brake lines.
The brake pedal feels like no matter how hard I push the pedal it still doesn't slow the car down like it should. Seems like bad brake fade or really cold brake pads with no initial bite at all.
Could this be glazed pads, booster, or master cylinder?
Or, is somehow all of this related to one another?
I miss having sensitive brakes.