My car has been down for 8 months as I upgraded the entire fuel system and swapped my AEM V1 for a MoTec M130 (in my spare time). With the previous set-up the car had a rigged 12 volt mod (pump ECU removed) with both pumps on separate relays. I undid the 12v mod and now have one pump triggered by the pump ECU and one by a relay. My issue is (and I probably don't understand how the fuel system works) that the only way the pumps turn on is if I jump terminals 3 and 5 on EFI 2. I tested the relay and it works fine.