Supra Forums banner

Search results

1-20 of 79 Results
Advanced Search
  1. It's alive!!! But runs bad

    MKIII Technical
    Ok I made some progress and got the car to a dirvable state. Reset the timing on it, I think it was off by a tooth. Threw a timing light on it and got it to 10 degrees so thats good. So now its running smooth, and no missing. Only problem now it the idle is kinda lopy. It's not too bad just...
  2. Replaced bhg, tried to stard and blew im gasket

    MKIII Technical
    No I have a felpro head gasket just bought a cheap set for the rest of the gaskets. I replaced the im gasket today with a felpro. Onto new issues, the car is started after realigning the cps but it is loping really bad and missing. It wont stay running unless I keep on the gas and it misses up...
  3. It's alive!!! But runs bad

    MKIII Technical
    Here is a quick webcam/youtube vid of what its running like. http://www.youtube.com/watch?v=vsFyFwkwlkI
  4. It's alive!!! But runs bad

    MKIII Technical
    Just got it all put back together after replacing a bhg. It runs but the idle jumps around alot and it usually stalls if I dont give it gas. I know the ecu has to "relearn" since it was disconnected for a week. Its throwing no codes. I have to replace the intake mani gasket which will be in at...
  5. Fast And The Furious: Fifth Gear 2011

    MKIV (1993-1998)
    lol
  6. Replaced bhg, tried to stard and blew im gasket

    MKIII Technical
    I just got the head back on after installing a new composite gasket w/arp bolts. I tried to start it and blew out the intake mani gasket and its throwing air out. I havent gotten the car started yet. First off I should have known better than to use it because the gasket was a paper type. I...
  7. Quick help with one vac line

    MKIII Technical
    thanks
  8. Quick help with one vac line

    MKIII Technical
    Bump, need help pretty fast.
  9. Quick help with one vac line

    MKIII Technical
    The line coming off of the hard pipe. On the other side of the hard pipe its connected to the bov. Heres a pic. This is the last thing that needs hooked up before I start it. I have looked at every vac diagram and nothing.
  10. DJ 2501's 87 7MGTE Build

    Builds & Projects
    Got some more work done. Head is on, timing is set, exhaust and turbo are ready to go. Should have the intake on tomorrow if I have time.
  11. DJ 2501's 87 7MGTE Build

    Builds & Projects
    Well just an update. Got the headgasket kit in and just got done putting the hg on and torquing the head down. Gonna let it sit overnight then recheck the torque then onto the rest.
  12. Weird coolant problem

    MKIII (1986.5-1992)
    Im not driving the car right now, the head is off, waiting on the gasket to come in.
  13. DJ 2501's 87 7MGTE Build

    Builds & Projects
    Yea this winter I will be doing a rebuild and machining the block and head to seal a metal gasket. For right now, I cant afford the downtime to have the block out and at the machine shop so its just a composite gasket and low boost :(
  14. DJ 2501's 87 7MGTE Build

    Builds & Projects
    Ok guys nothing big right now, just replacing the hg. The po slapped an hks on there with no machine work and it wont seal against the block. Car was doing the overflow trick. For now, just replacing with a stock composite gasket. The entire engine will be coming out this winter to be machined...
  15. Please help the newb out

    MKIII Technical
    Thanks again!
  16. Please help the newb out

    MKIII Technical
    Awesome, thanks. For stage 6 and 7, what year and model to get the afm off of? Also, for stage 7 what fuel controller to buy? Is that the apexi safc everyone talks about?
  17. Please help the newb out

    MKIII Technical
    Ok I don't come from the turbo world and don't know a lot about them. Im learning alot on these boards but have some questions. I'm not new to engine building however if that helps. So onto the question. Can someone please breakdown what is required to be able to turn up the boost on a stock...
  18. Weird coolant problem

    MKIII (1986.5-1992)
    bump
  19. Weird coolant problem

    MKIII (1986.5-1992)
    I bled the air out, its not air bubbles in the system. Its def exhaust gasses getting into the cooling system
  20. Noob question, why are people not building the 7mgte's?

    MKIII (1986.5-1992)
    Its pretty bad when I'm unsubscribing from my own thread haha you guys are worse than the Honda guys arguing over vtec and sohc over dohc... even they dont get this worked up tho...:wavey:
1-20 of 79 Results
Top