Supra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. MKIV (1993-1998)
    Hello all. I'm looking for some guidance. I have a 2jzge vvti out of an 01 Lexus is300. Looking to get around 500hp ish. The vehicle it's going in is large and heavy so I'm looking for a little more bottom end torque but decent top end. Main question is what cam set would be recommend? Or...
  2. MKIII Technical
    So I found a Mk3 for $1,000 from an older guy, the only problem with the car is that it doesn't have an engine in the car. What's a cheaper alternative to a 2jz or 2jz that might fit within the car. The optimal budget for me would be 1500-2000 for the engine (New to the whole working on cars thing).
  3. MKIV Technical
    I was lucky to have found a '93 JDM Supra for cheap. I plan on rebuilding the motor, then the whole car. The goal is have close to a 9,000+ redline, 800+ whp on the stock block whlist using the stock block and maintaining decent streetability/comfort Turbo: G30-900 with a T4 housing 1.06 AR...
  4. MKII (1982-1986)
    Well uh I’m thinking of buying a used 1983 supra that’s pretty cheap from a close family friend, they just wanted it gone so they’re willing to give it to me extremely cheap. The thing is it has a rod knock, I was thinking what would be better to just repair that myself or to replace the...
  5. Naturally Aspirated
    So I've done some research and found many conflicting opinions and supposed 'proper' build paths, i'm relatively new to the world of the MK4 having bought a 94' GE for $9000 AUD, as a first car. I found a guy close by that had a built supra and loved it and now want to build my own. A lot of my...
  6. MKIV (1993-1998)
    Im rebuilding a 1999 2jz, from a gs300 and im in the process of choosing a headgasket. Im planning on boosting the engine and would like to get a thicker headgasket, (to lower compression) but whenever i look at their specs, it always says bore 87mm or 87.5. I didnt bore out my cylinders so...
  7. MKIV (1993-1998)
    Im buildng a 1999 2jz ge vvti, from a 1999 gs300, anyways, im down to rebuilding the bottom end after resurfacing and honing. Im checking my ring gaps on the 2jz hasting rings i bought and see wierd results. Acording to the rebuild manual it should be like this first ring:0.2mm to 0.4mm second...
1-7 of 7 Results
Top