Supra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. MKIII (1986.5-1992)
    Hey guys I'm struggling to get reliable information on how to get your injectors to fire using micro squirt since they are low impedance and the micro squirt is made for high impedance. I've heard people wiring in resisters, and others say it's not worth it and to just get new injectors. I'm...
  2. Builds & Projects
    Last year I picked up a 1993 e34 535i for about $400. It sat outside for a year until I found a rusty Supra shell that I traded the e34 for. e34 on its way to be traded Here are pictures of the Supra from the seller and when we picked her up. In pretty rough condition. A lot of the...
  3. MKIV Technical
    Hey Guys, I have recently been looking for a new project car and have stumbled upon a MKIV supra with a 1UZ-FE engine swap (pretty sure it is VVTI) paired with a T56 6spd manual transmission. The owner says it needs a new brake booster and I was wondering if I can just opt for a regular NA MKIV...
  4. New Members Forum!
    I plan on buying a 1996 crown majesta with the VVt-I engine in it. I'll be sharing this car for a couple of months but when that's done I plan on manual swapping it and putting a new 2jz in it. Has anyone done this before? are there any guides? Id greatly appreciates any knowledge yall have.
  5. MKIII (1986.5-1992)
    Does anyone know if it's possible to swap in the 5.7L V8 from the second gen tundras into an A70? I know that if it is possible, it'll require a lot of work with fabricating, relocating, all of that
  6. MKIV (1993-1998)
    Hello all. I'm looking for some guidance. I have a 2jzge vvti out of an 01 Lexus is300. Looking to get around 500hp ish. The vehicle it's going in is large and heavy so I'm looking for a little more bottom end torque but decent top end. Main question is what cam set would be recommend? Or...
  7. MKIII Technical
    So I found a Mk3 for $1,000 from an older guy, the only problem with the car is that it doesn't have an engine in the car. What's a cheaper alternative to a 2jz or 2jz that might fit within the car. The optimal budget for me would be 1500-2000 for the engine (New to the whole working on cars thing).
  8. 1JZ/2JZ Swap
    I have an BMW E30 it was swapped with a 1GFE so I’m planning to swap it with 2JZGE. Can anyone let me know what is required besides engine, gearbox ,wiring ,ecu ,foundations do I need to replace the drive shaft and differential? And what size radiator can I use ?
  9. 1JZ/2JZ Swap
    Hi guys firstly I’m new here and new to the car community. I have a BMW e30I wanted to swap its engine since it got seized. A lot of people suggested me to do a 2jz swap but no one told me which one to buy And I swapped my e30 with a 96 non vvti 2jze N/A Now I want to know if it’s worth it can...
  10. 1JZ/2JZ Swap
    So I’m a complete newbie when it comes to 2jz gts but I have many questions. My goal is to engine swap a 2jz gte into a Nissan 350z. What would I need to rebuild the 2jz gte and how can I achieve 1000hp+. Also any parts I need to upgrade?
  11. MKIII (1986.5-1992)
    Hello, I am completely new to cars and mechanical work in general so bare with me, I have a NA 90 Supra (manual), and want to change the engine to a 7mgte Knowing the fact that I don’t know shit about cars except how to change oil lololol, should I have the engine swapped in a shop? I am a...
  12. MKIII FAQ
    Hello, I am completely new to cars and mechanical work in general so bare with me, I have a NA 90 Supra (manual), and want to change the engine to a 7mgte Knowing the fact that I don’t know shit about cars except how to change oil lololol, should I have the engine swapped in a shop? I am a...
  13. MKIV (1993-1998)
    So I'm 2jz swapping my 1971 240z and I'm doing the fuel system now, and I'm looking for a good inline fuel pump that will let me run it NA now and medium power later. I'm thinking about the AEM 50-1005 but my biggest fear is that it might be too high pressure for the stock system. I like this...
  14. New Members Forum!
    Hey All - happy holidays, new years and all that jazz. It's been a min since I've done a build but nonetheless my '06 G35 sedan will be receiving a 1jz-gte vvti motor transplant after both car and motor are finished being prepped. I look forward to gaining tons of knowledge throughout the build...
  15. New Members Forum!
    Hi everyone. I am trying to swap a gte into my 02 manual is. I am wondering if it is better to go with the aristo vvti rather than the other gte vvti? The aristo seems to cost much more why is this?
  16. 1JZ/2JZ Swap
    Hello Everyone, my name is Steven Hernandez. I am writing to hopefully get a little bit of advice. So I have a 99 Ford ranger prerunner and recently I swapped in a 2jz with single turbo. Problem I have now is the transmission as I'll be running an AEM V1 ECU. I am planning on swapping in a 4l80e...
  17. MKIII (1986.5-1992)
    Hello, i am new to the forum. i got REALLY lucky and found a 87 supra in mint condition. 7MGE 3.0 AUTO NON-Turbo (yet) 40,000 miles. a interior intact no rust. (already bought wheels/ coil overs being delivered) Found off craigslist the guy said he bought it from an old lady who's husband had...
  18. Supra FAQ
    I’m using a 2JZ GE out of my friends 93 MK4 but am doing a turbo conversion And putting it in my 74 Datsun 260Z. My question is do I have to use a universal wiring harness from Haltech (using a Haltech Elite 1,000 ECU) and wire It up myself OR can I use a GTE wiring harness and use the Haltech...
1-18 of 18 Results
Top