Supra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-10 of 10 Results
  1. MKIII Technical
    I just bought new bearings for the oil pump driveshaft of yotashop, measured it and the driveshaft at the machine shop. The oil clearance was within spec. I used a brass punch to lightly push the new bearing in, and the holes line up perfectly. I tried putting the driveshaft in but it wouldn’t...
    oil
  2. MKIII Technical
    Hey guys! Just got back from a drive and after popping the hood I noticed that there was some oil that had dripped out of my intercooler piping and into my engine bay. It could just be a loose hose clamp, but now I'm worried that I'm getting a bunch of blowby from my rings being shot. My spark...
  3. MKIV (1993-1998)
    Hello, I was about to change my spark plugs (2JZ-GTE) and noticed that 1 of the spark plugs had oil on it, both on the electrode and on the threads. I don't see oil anywhere else, top seems dry. The other 5 spark plugs were perfect. Any idea what this could be? Also, torque spec for the...
  4. MKIII (1986.5-1992)
    Boo hoo. Another post about motor oil. I’ve spent hours searching. Everyone says different things. Some say “ooh 10w40 gunks up the engine!! Use 5w30” or “read the damn Tsrm”. I’m not an oil expert so I’m not sure what to use. I have an ‘87 turbo, Pacific Northwest, so around 70-75 in the...
  5. MKIV (1993-1998)
    Hello! I'm running 10w-60 Castrol in my Supra (Because of previous owner). It is modded quite a bit, but still stock clearance... On startup i have about 6-7 bar (85-100 PSI) oil pressure. After about 10-15 min it is about 2-3 bar (30-45 PSI) at idle. While cruising it is about 6 bar (85...
  6. MKIV (1993-1998)
    I know that similar questions have been asked about a million times before, but here goes anyways: I have a built 2jz-gte. Enginebuilder did NOT change the clearances. The previous owner used to drift a lot (NOT THIS CAR) with the guy that made the engine. Now here comes my question: Previous...
  7. MKIII (1986.5-1992)
    Hi everyone, I'm planning on reaching 400whp on my 7M-GTE and thought of getting one 340lph fuel pump (either DW300 or AEM340), 600cc injectors and an FSE Sytec fuel pressure regulator. I also just bought a GReddy T67 turbo. Now the question is: I've searched around the forum but wanted a...
  8. MKIV (1993-1998)
    Hello, i just bought a 94' Supra. I have a few questions i hope you guys can help me with, thanks! 1. Jacking point, best place is the crossmember right? 2. Fuel tank cover rust? Anything i should be concerned about? Swap for a new one or leave it? 3. What kind of oil should i use? The...
  9. MKIII Technical
    Hey guys! I’m new here and looking to start some mods on my 88 Supra. About to do an oil change soon. So figured I’d do some small things like upgrade the oil cooler and coolant lines to steel braided while the system is drained. But after a little research I’ve come to find the oil cooler...
  10. Supra FAQ
    Does anyone use motul oil for 1jzgte vvti?
1-10 of 10 Results
Top