Supra Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 20 Results
  1. Builds & Projects
    Hello All, I will start with this is my first post. Honestly I haven't needed to post anything because almost every question I could think of has already been answered, but in this case I am looking for some specific recommendations for my build. To start with my car is not a Supra, but rather a...
  2. General Supra Forum
    Recently imported a crown JZS171 to Canada, long story short it revs terrible when its cold (won't rev or misfires with a bit of a loudish bang at very low rpms) after it has idled for a bit it revs fine. Driving it is where problems continue, it wont rev past 3k rpm under load unless...
  3. General Supra Forum
    Hey guys, I know several people have had the issue where after installing BC 272 cams with upgraded springs on a VVTI motor that there is a lot more noise from the gear. Some vvti duty helps a little but it doesn't go away. It is driving me crazy. Is this just a BC Cams/Springs issue? Any...
  4. MKIV (1993-1998)
    Hey, my tuner blew up my 2jz-ge VVT-I and I bought a 2jz-ge non-vvti to replace it, but it didn’t come with camshafts. I was thinking of buying new cams for it but was wondering if I needed to buy both cams, or if I could get away with just buying the intake side non-VVT-I cam, and using my...
  5. MKIV (1993-1998)
    I'm looking for a shop who can do a full body restoration of a 1999 J-SPEC VVTI turbo. Currently has a sorta janky 3000GT replica kit and I want to have it taken down to bare metal/plexiglass and repainted OEM royal sapphire blue. Anyone know of any super high quality body shops in Thailand...
  6. MKIV Technical
    I’ve recently got a 1998 Toyota aristo that has started misfiring when the engine warms up, the first 5 mins runs perfect but once the temp meter goes above the cold mark the engine starts to give little pops out of the stock exhaust and the engine would shake. What I know is on the car...
  7. MKIV Technical
    Hey guys😀, have been using this forum for the past 10 years and it has been so helpful, almost everything I have ever needed to know I have found on this forum, first I wanted to thanks to all the members who have been helping and answering questions over the years.🙌 The time has come for me to...
  8. New Members Forum!
    Hi Supra fans, I am working with a small group of local car buds and the widow of the former owner/builder and his 87 Supra. It's an amazing 2JZ GTE VVTi (post 2k JDM Aristo) built Gen3 Turbo with some serious mods including dual stage Nitrous, 80mm Garrett Turbo, etc. It's currently up for...
  9. MKIV (1993-1998)
    I've been researching for months before I made this lol Hey guys got my mk4 in February of this year 93 na auto I owned a gs300 with an vvti aristo swap /cd009 and my ultimate goal was to out the vvti swap into my mk4 I have a few questions about the stuff I've purchased so far and someone...
  10. Builds & Projects
    Goal is daily 800whp. 2jzge internals: BC springs/retainers BC stage 3 272/272 Wiseco Metal fist std 9.5cr MANLEY H-Tuff Rods ARP studs Turbo/Wastegate/Manifold: Reserved. Fuel Rail/Injectors: 20-0371 Fuel Rail, Toyota 2JZ-GE 20-0371-PK Fuel Rail Plumbing Kit, Toyota 2JZ-GE, Returnless...
  11. MKIV (1993-1998)
    My problem is simple I can't bother with the immobilizer from a gs300 ECU so I thought id just buy a gte vvti ecu (without immobilizer) for my car. Will it work? Thanks
  12. MKIV (1993-1998)
    Hi again, So I've finally completed the swap on my 94, originally NA 2JZ-GE, JDM Supra I've swapped in a 2JZ-GTE VVTi, stock ECU, stock turbos, and a TT A340E to pair with it. Mods include - HKS intake, Garage Whifbitz downpipe with restrictor plate, Blitz Exhaust, AEM fuel pump, eBay...
  13. MKIV (1993-1998)
    Hi, I am swapping an Aristo VVTi 2JZ-GTE into my 1994 Supra SZ, originally a 2JZ-GE and automatic. Originally, it has a drive by cable system. Do I need to swap a drive by wire system into the car for this swap? I'm asking as I cannot find information on this, I am assuming it needs to be...
  14. 1JZ/2JZ Swap
    So I have a jzx100 1jz vvti swapped into my s13, Everything is pretty much stock the cars running 11psi and j pipe is deleted. So the car ran great boosted normal then all a sudden one day it threw a CEL and would go flat 10.0 as soon as it got out of vacuum and started to build boost, I’m not...
  15. New Members Forum!
    Good evening everyone! Just wanted to say I am happy to finally be joining this forum as an owner of a Supra. I recently pulled the trigger on a '93 with a V161, VVTi swap with a Precision 6768 and Ridox bodykit. I can't tell you how excited I am to finally own my dream car that I remember...
  16. MKIV (1993-1998)
    I am looking around at cars online specifically MKIV supra sz models, how can i tell if one is vvti or not when buying?
  17. 1JZ/2JZ Swap
    1jz Vvti This is on the Turbo side of the block, I have no idea what its for or what it does or what I should do with it? Please let me know thank you!
  18. 1JZ/2JZ Swap
    I could use some help with wiring. I have a JZX100 I have converted to rear sump and dropped in my 87 turbo. I was given a custom Plug and Play harness from ECU masters that is not quite on sale yet (I'm testing it for them, should be released soon to the public), I have purchased an ECU masters...
1-18 of 20 Results
Top