Joined
·
249 Posts
would the 1jz with a single ct26 exhaust manifold work with our 1jz for the supra?? without banging out the chassis?? ct12's are giving me a nitemare and ct26's are alot easier to work with
1JZ Question
1 - 4 of 4 Posts
A
amorak
·Guest
Joined
·
0 Posts
Welcome to team search.
Joined
·
1,011 Posts
1. The 7m exaust mani is different from the 1jz
2. Search before you post something that has been covery many many many times.
2. Search before you post something that has been covery many many many times.
Joined
·
1,446 Posts
I don't have a 1JZ, but I can't see why not...
Unless, Toyo deemed it necessary to redesign the head exh. port outlet locations.
Editorial:
That'll be cool. Then you can get in a debate with Dean, John, and others about which CT26 upgrade is best -
HTH,
Howard.
Unless, Toyo deemed it necessary to redesign the head exh. port outlet locations.
Editorial:
That'll be cool. Then you can get in a debate with Dean, John, and others about which CT26 upgrade is best -
HTH,
Howard.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
1JZ gt3076r dyno'd
1JZ/2JZ SwapThe engine is stock internally 540cc injectors gt3076r 0.82 housing Emanage blue 3" exhaust FMIC etc 1.3bar 372.5whp Just wondering why when turning the boost past 1.3bar no more power was made is that the wall for a stock lump with a gt30? Don't get me wrong it is very quick but I was hoping...- 18
- 7K
-
Aristo 2jz hydrolocked with fuel... NEED HELP
1JZ/2JZ SwapWas driving and the car slowly started dying and the afr pinned rich, out of nowhere. Tried starting the car but found out it was dumping fuel like crazy. When I pumped the fuel out with no spark plugs, the engine had a crazy amount of fuel in it, even after just a few seconds of ignition and...- 27
- 682
-
VictorN01 · updated
-
Help starting 1jz on engine stand
1JZ/2JZ SwapI have a jzz30 that I'm trying to hear run on a engine stand. I'm pretty sure my problem is with the ECU wiring. Any help would be greatly appreciated. This is how I have it hooked up now. Ground- Eo1,Eo2,E1, engine block Positive- IGSW,BATT Can you guys think of anything else to connect? Also...- 2
- 240
-
Is a 2jzge worth swapping?
1JZ/2JZ SwapSorry if theres a thread on this somewhere else but I couldn’t find one. But i was going to purchase a 2jzge and swap it into my rx8. I would much rather have a gte but its a bit out of my price range and like 5 times more expensive than the ge. I would want to turbo it eventually and get around...- 2
- 238
-
89 Toyota Supra mk3 1jz swap
1JZ/2JZ SwapHello everyone, so I want to 1jz my Supra mk3 but I don’t really know where is the best place to actually purchase the motor. I also don’t really know what I would need to do to my car to complete this swap and also what turbo would be good for the swap. Thanks all for the help.- 1
- 300
Join now to ask and comment!