Supra Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
601 Posts
Discussion Starter · #1 ·
I am going from a stock twin turbo 1JZGTE to a single turbo 1JZGTE. Just wondering how everyone routed there oil lines. Is there one line going into each turbo and 1 line going out of each turbo. If so do you cap off one set? Or can you buy a braided oil line kit from somewhere?

Any help will be appreciated.

Thank you
 

·
JZA is best f**k the rest
Joined
·
351 Posts
My feed line goes up and around the manifold to the top of the turbo. I bought some oil lines from SP in a kit and ended up making all my own stuff. Return line goes on the side of the manifold to the block. Let me know if you need any info.
 

·
Registered
Joined
·
601 Posts
Discussion Starter · #3 ·
What did you do with the second set of oil lines?
Or are the two turbos in series? There is a line joining them.
Also how did you attach the new lines onto the old lines?
Or did you just replace them. (If so what type of ends did you use)
Thanks
 

·
Registered
Joined
·
635 Posts


i found this is the best way to run your oil lines.....but you have to make sure that you plug the rear feed on the block which fed you stock turbos....
 

·
JZA is best f**k the rest
Joined
·
351 Posts
lpolo69 said:


i found this is the best way to run your oil lines.....but you have to make sure that you plug the rear feed on the block which fed you stock turbos....
Yep, that way works great.
 
1 - 5 of 5 Posts
Top