Supra Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3,236 Posts
Discussion Starter · #1 ·
Has anyone used twin or single -3an oil feed lines. I am running twin Turbonetics turbo's and one went out from what I can see is possible oil starvation. The other one seams fine I have twin -3an feed lines. Turbonetics said that -4or-3 should be fine but I am thinking that I should upgrade to larger lines. Any input would be appreciated.

Lawrence
 

·
.
Joined
·
238 Posts
All Boostlogic kits (mine included) come with -3an feed lines, no problems here.

Brad
 

·
Registered
Joined
·
2,913 Posts
I spoke to Turbonetics engineers about this when I had a Turbonetics turbo and they were ADAMANT that anything LARGER than a -4 would cause problems. I don't see how it would matter how large the line is -- I'd have thought that a -4 would flow waay more oil than the turbo center section will allow to pass through, but perhaps so.... <shrug>


93 twintrbo said:
Has anyone used twin or single -3an oil feed lines. I am running twin Turbonetics turbo's and one went out from what I can see is possible oil starvation. The other one seams fine I have twin -3an feed lines. Turbonetics said that -4or-3 should be fine but I am thinking that I should upgrade to larger lines. Any input would be appreciated.

Lawrence
 
1 - 4 of 4 Posts
Top