Supra Forums banner
1 - 2 of 2 Posts

·
Boost Creep.
Joined
·
432 Posts
The aluminum (or steel in earlier models) part that bolts to the block is (according to toyota) an engine mounting bracket. The piece that goes between the bracket and the subframe is commonly what is referred to as the mount. Toyota calls this part an engine mounting insulator.

51cards is correct, the "insulator" is identical between the later-style 7m and the 1jz. The early 7m used a vastly different type. The 2jz uses a related insulator (i.e. also silicone-filled), but it's shape is different.

IIRC, you can mount a 2jz in a late-style 7m subframe if you use the 1jz engine mounting brackets. Someone correct me here if I'm off...

HTH,
Brendan
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top