Supra Forums banner

1 - 4 of 4 Posts
B

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Hey guys...gonna install my boost gauge this weekend with the lotek pod. I was just wondering wuts the easiest way to mount the pod? Should i just do it the way they say on mkiv.com or would it be easier just to find some bolts that will screw into the holes already in the pillar? Thanks guys!!
 

·
Super Moderator!!ON PATROL ALL OVER!!
Joined
·
10,459 Posts
the mkiv.com way is the best way !
blkmkivtt said:
Hey guys...gonna install my boost gauge this weekend with the lotek pod. I was just wondering wuts the easiest way to mount the pod? Should i just do it the way they say on mkiv.com or would it be easier just to find some bolts that will screw into the holes already in the pillar? Thanks guys!!
 

·
Registered
Joined
·
342 Posts
I had the hardest problem finding the right plug for the existing hole that would handle the extra weight so what I end up doing was using self-tapping screws into the metal structure of the pillar. It is very easy.
 
B

·
Guest
Joined
·
0 Posts
Discussion Starter #4
Thanks guys for your help. I was wondering where can you get the plugs that will fit in the holes in the apillar. Would they have these at any local hardware store? If i cant find these i will most likely end up using some screws that will fit the stock holes. Anyone have any ideas of the size of the screw i will need.
 
1 - 4 of 4 Posts
Top