Supra Forums banner
1 - 20 of 26 Posts

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #1 · (Edited)
about 3 months ago i dedided to rebuilt my 2JZ engine, and going single. it had 180000km, about 110000 miles....
i bought CP Pistons, and i have worked 2 months on stock head, stock rods and stock crank for optimization.
the head was full ported, the rods and the crank were lighten, perfectly balanced and hardened.
Now some photos
Michele Meo, engineer of MDR Autosport with stock 2JZ head


Stock 2JZ Head




first test for flowmeter


Stock Crank (27Kg at the beginning)
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #2 · (Edited)
This is the head after 1 month of work with flowmeter and a lot of patience :)
(not finished)
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #3 ·
Stock Crank after some days of work.....1,9 kg more light than stock (not finished)





 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #4 · (Edited)
Stock Rods and CP Pistons







the stock rods after this work weight about 120grams less than stock
(800gr stock and 680gr after)
balanced +/- 0.5 grams
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #5 ·
I'll post as soon as possible the photos of finished parts.
 

·
Registered
Joined
·
6,780 Posts
congrats buddy, keep us updated
 

·
Damn my stomach is sick!
Joined
·
711 Posts
Nice!! Michele sei di Roma? Dovremmo incotnrarci!! Penso tu sia l'unico oltre a me ad avere uan supra con turbina singola!!
Fammi sapere!!

Fabio
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #8 ·
AtomicFabio said:
Nice!! Michele sei di Roma? Dovremmo incotnrarci!! Penso tu sia l'unico oltre a me ad avere uan supra con turbina singola!!
Fammi sapere!!

Fabio
Ciao Fabio. Sono Paolo. è da tempo che sento parlare della tua auto, ma purtroppo non ho mai avuto il piacere di vederla. Mi farebbe piacere incontrarti un giorno, giusto per scambiare 2 chiacchiere.
se vuoi questo è il mio contatto msn [email protected]

Ciao
Paolo
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #10 ·
today the crank was complete . its weight is 54,6lb (stock is 59,5lb)
 

·
Cheifbootknocka
Joined
·
1,944 Posts
DevilSupra said:
today the crank was complete . its weight is 54,6lb (stock is 59,5lb)
Hook us up with some pix. Did it get fully knife edged ?
 

·
Registered
Joined
·
227 Posts
dam looks nice, i wana get new pistons and rods for mine
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #13 ·
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #14 ·
sorry for the bad quality of the photo, today i'll use my canon 300D....
 

·
What? Me Save Gas?
Joined
·
356 Posts
scusi don giovanni caorle toni de gelati un mafia al capone de diavolo capricciosa grande del caffe late?

AtomicFabio said:
Nice!! Michele sei di Roma? Dovremmo incotnrarci!! Penso tu sia l'unico oltre a me ad avere uan supra con turbina singola!!
Fammi sapere!!

Fabio
 

·
Damn my stomach is sick!
Joined
·
711 Posts
lightxx said:
scusi don giovanni caorle toni de gelati un mafia al capone de diavolo capricciosa grande del caffe late?
AHHAAHAH LOL!

That's not excatly perfect italian but well ok I think I can understand lol!!

By the way Paolo I've added you but you seems to never be online!!
:)

fabio
 

·
Boost4fun
Joined
·
1,848 Posts
Looks damn nice until now. I am anxious what the numbers will be when finished..
What are you plans with the turbo? GT35R/T04 or something even bigger?
Ciao
Gerd
 

·
Cheifbootknocka
Joined
·
1,944 Posts
" bought CP Pistons, and i have worked 2 months on stock head, stock rods and stock crank for optimization."

Just curious why did you decide to do forged pistons with stock rods ? I thought the stock pistons were stronger than the stock rods. I was thinking about doing aftermarket rods but stock pistons....
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #19 ·
Hefti2 said:
Looks damn nice until now. I am anxious what the numbers will be when finished..
What are you plans with the turbo? GT35R/T04 or something even bigger?
Ciao
Gerd
i'll use a PowerHouseRacing GT67 on PHR Manifold, custom DP and MP and HKS Carbon Ti exhaust....
 

·
Drive Hard
Joined
·
640 Posts
Discussion Starter · #20 ·
TooJayZee said:
" bought CP Pistons, and i have worked 2 months on stock head, stock rods and stock crank for optimization."

Just curious why did you decide to do forged pistons with stock rods ? I thought the stock pistons were stronger than the stock rods. I was thinking about doing aftermarket rods but stock pistons....
you are right...but i want to make a test (and unfortunately i haven't now the money for good rods...i don't want to buy eagle rods)....on october if the engine are ok i'll buy the carrillo H beam or Crower titanium rods. Sometime the good ideas are too much but the money aren't :rolleyes: :)
 
1 - 20 of 26 Posts
Top