Supra Forums banner
1 - 1 of 1 Posts

·
Vendor
Joined
·
4,400 Posts
find the rim width that specific tire is meant for (depends on the aspect ratio) then if you are going bigger (like its meant for a 9 inch but you put on a 9.5) instead of X contact patch, it will have approximately X + .2 inch contact patch, same way if you go down a half inch, it should lose about .2 of contact patch
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top