Joined
·
1,005 Posts
Hey just wanted to know if there is anything I should know before installing the HKS SD myself? Thanks..
About to Install HKS Drager Exhaust Myself...any tips???
1 - 4 of 4 Posts
L
lucky
·Guest
Joined
·
0 Posts
soak the exhaust bolts in WD-40 if they are rusted...other than that you should have no problems.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Supra MKIV JDM Brake Lines routing help!
MKIV TechnicalHi!! I need a little help!! Anyone knows the connection or the route of the brakes lines please? I Made this drawing. Thanks in advance.- 6
- 3K
-
lucassanabria · updated
-
HELP installing 272 Cams
MKIV TechnicalAfter I have installed all the new seals, BCsprings, retainers, locks and buckets, with T-belt off, put crank at -10 btdc so all pistons are slightly down, install new BC 272 cams, install cam gears, torque cams as per manual. Then turn CAMS clockwise to tdc notches, and than turn CRANK to tdc...- 4
- 96
-
rallly · updated
-
Rhd jza80 HID kit
MKIV TechnicalRecently acquired a rhd supra and slowly starting the process of swapping things over. Got myself some glass headlights and wanted to swap bulbs while I’m at it. Been told jdm lights differ from usdm. Hard finding more info on this. Thoughts? Trying to find a quality hid system, seems LED isn’t...- 3
- 219
-
2JZ-GTE Igniter - Required when you go to a aftermarket harness + ECU
MKIV TechnicalI came across asking myself today, do you need a igniter when you go to a aftermarket ECU and Harness? I noticed my friend is running a MOTEC and does not have one for his car.- 2
- 275
-
98 Taillight LED bulbs?
MKIV TechnicalHey guys, Just installed a pair of S2 taillights on my 93 Supra RZ. I would like to convert to LED. I would like to purchase from here as the prices seem very good. https://www.superbrightleds.com According to my search in the Forums, looks like I need 2 x 7440 and 2 x 7443 bulbs Just not...- 3
- 136
-
rallly · updated
Join now to ask and comment!