hello all, my AC has been not so cold lately. i would turn it on full blast and it would get a little cold then just blow room temp air. wut gives? do i need a recharge of the r-134a stuff? i took high and low pressure readings. high reads around 145 and low reads at zero. meaning anything?
AC problems...wut gives?
Join the discussion
Recommended Reading
-
Hello everyone I got a PHR dual fan harness and I would like to know how can I hook it up on my AMV 2 and which pinout it's going to be I need you guy
MKIV TechnicalHello everyone I got a PHR dual fan harness and I would like to know how can I hook it up on my Aem v2 and which pinout it's going to be I need you guy help- 0
- 32
-
Mosupra1 · updated
-
Intake Manifold Gas Filters
MKIV TechnicalJust curious, what's the purpose of the little black filter fittings for vacuum on the intake manifold?- 0
- 78
-
Anywhere to plumb in fuel-pressure sensor for stock fuel system
MKIV TechnicalMy 94TT is BPU+ and I just got a Haltech Elite 2500 to go standalone. Sticking with stock fuel (upgraded injectors though) for now, and would like to drop in a fuel-pressure sensor somewhere. Is there any easy spot to do that ? Maybe the banjo/union bolt on the existing fuel-pressure...- 2
- 58
-
Halfwalker · updated
-
Supra MKIV JDM Brake Lines routing help!
MKIV TechnicalHi!! I need a little help!! Anyone knows the connection or the route of the brakes lines please? I Made this drawing. Thanks in advance.- 9
- 3K
-
lucassanabria · updated
-
HELP installing 272 Cams
MKIV TechnicalAfter I have installed all the new seals, BCsprings, retainers, locks and buckets, with T-belt off, put crank at -10 btdc so all pistons are slightly down, install new BC 272 cams, install cam gears, torque cams as per manual. Then turn CAMS clockwise to tdc notches, and than turn CRANK to tdc...- 6
- 160
-
rallly · updated
Join now to ask and comment!