Supra Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
701 Posts
Discussion Starter · #1 ·
I can not get the car in gear. I have bleed it twice. When I push in clutch there is a rattling sound. With I let off it goes away. I had someone press on clutch while I watched the rod from the slave cylinder to see how much it pushed the clutch for I would say it was maybe half an inch to an inch at most movement. Help.
 

·
Registered
Joined
·
701 Posts
Discussion Starter · #4 ·
baf32 said:
the disk may be backwards....
If thats the case will that make it impossible to go into gear. I REALLY don't want to drop my tranny again :( The log part of the ACT center is facing the front I believe.
 
G

·
i made the mistake once, the car will not go into gear. you can push the clutch in and it does nothing at all. all you hear the whole time is chatter chatter chatter.

bryan
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top