Supra Forums banner

AEM EMS users.

527 views 4 replies 4 participants last post by  flubyux2 
#1 ·
Can someone post a base map that I can load in the demo software to get an Idea of what I’ll be doing after i get my EMS.

I want to fool around now so when I get it I have a good idea of how to work it.

For you 1jz guys I'd especially like a map form you.

Any nuggets of info that you have and you want to share?

I know the AEM forums are around but they are pretty stagnant in the mk3 section


Thanks,
 
#2 ·
my basemap is in the basemap thread in the 1jz section.. i will update it with my current map when i get home (modified a little, little less timing and better a/f in cuising, getting better mpg)

well heres a link to it
http://home.cfl.rr.com/tissimo/1jzbasemap.V1.11.cal

its a 1.11 cal.. i havn't converted to 1.19 yet..
 
#5 ·
if you go on AEMforum.com, there is a writeup on how to generate a basemap for stock sensors and injectors. it also tells you how to scale it and stretch it and whatnot. i was able tomake an 18psi map from nothing on my friends 2j... it would have worked too if the damn Map sensor wire wasnt inserted into the AT OD lockup slot on the ECU... fuckin Garage Advance...
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top