Supra Forums banner
1 - 3 of 3 Posts

all motor baby!
315 Posts
Discussion Starter · #1 · (Edited)
Hey guys, more all motor madness from down under. My friend Ed has built this 7MGE and is going to drop it into his MA61. He has asked me to post it on here.

well, here she is, 95% finished - just waiting on the odd bit of machining, and some intake connectors etc. 14 months in the making, and a lot of effort by a lot of people to get her here. A big thanks goes out to:

-Wilkins Performance Engines (Graham Wilkins)
-GT Tooling (Geoff O'Toole)
-Stuart Wilkins
-Phil Riles
-GK Tooling
-NAS Automotive

As well as the friendly folks of:



-7M-GE 3.0L 24v DOHC I6
-83.5mm bore 91.0mm stroke
-7M-GTE Block - oil squirters
-ported and polished port and chamber
-ported and matched manifolds
-custom upper manifold with cobra twin 57mm t/b
-FGK tuned mandrel exhaust manifold
-Custom machined pistons and block
-HKS 1.2mm metal head gasket
-10.7:1 static compression ratio
-bottom end: ground, balanced and polised and blueprinted
-ARP b/e fasteners
-MSD superconductor leads
-TRD clutch

+lots of little custom machined bits

Cheers ya'll!
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.