Supra Forums banner

1 - 2 of 2 Posts
C

·
Guest
Joined
·
0 Posts
Discussion Starter #1
I just ordered the RPS Carbon Claw clutch. I'm totally stock know but I will eventually make BPU's up to about 500 HP. The stock clutch I have now is starting to slip and I don't want to take any chances with the increased HP. Any opinions or experiences on this clutch? Thanks
 
N

·
Guest
Joined
·
0 Posts
Discussion Starter #2
I have this clutch. Be patient as this clutch takes some time to break in. I would say about 2-3k miles. In the begining it will
CHATTER alot and be very agressive. Even when fully broken in
it's still not what I consider smooth by any means. The clutch has an on/off switch feel with about an inch of usable travel. Looking back I think this clutch was overkill for the street. Then again the thing absolutely doesn't slip. Performance wise the things great.
However the stock style disk with RPS preasure plate would probably be a good compromise. By the way I used a brand new
toyota flywheel w/ the unsprung version of the disk. Since my purchase I think it is offered in a sprung version as well, wich would probably make it smoother.
 
1 - 2 of 2 Posts
Top