Supra Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
297 Posts
I lenghtened mine 19-20". I can run it right across the top of the firewall, exactly where the old harness went. Wasn't too long either. DON'T lengthen it 30" as it states on some websites. That is way too long. The biggest thing is properly doing the shielded wires. There have been several folks that thought they had it right only to have to either run new shielded wires for the knock sensors or tear the harness apart. Do the research, and try a couple of test wires first to make sure you know how to get the shielding covering perfectly.

Good luck

Marty
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top