Are the NA and TT fuel pump hangers the same?

The hangers? It's probably the same. NA guys use TT pumps no problem, so I wouldn't see any difference.

NA-T's and TT guys both use the same Walbro pumps and everything else.

Ok great thanks for the info! I was asking because I have access to a NA pump hanger and wanted to build it up for dual denso pumps and then drop it into my TT. Just wanted to make sure it would still bolt up/plug in the same as my TT hanger. Sounds like it will. Thanks again.

There are minor differences.

The NA hanger has an electrical plug clip in and the TT has wires hanging. The TT's have a shorter pipe on it it, too. why? I dont know.

michaelvanle said:

The hangers? It's probably the same. NA guys use TT pumps no problem, so I wouldn't see any difference.

NA-T's and TT guys both use the same Walbro pumps and everything else.

Click to expand...

no they don't use the same pump

TT pumps have the pump outlet and the pump filter on the OPPOSITE SIDE

NA pumps have the pump outlet and the pump filter on the SAME SIDE

You can still use a TT pump but it will not be touching the rail....thats what I did because the walbro 341 is better than the walbro 342

supradriver247 said:

There are minor differences.

The NA hanger has an electrical plug clip in and the TT has wires hanging. The TT's have a shorter pipe on it it, too. why? I dont know.

Click to expand...

TT pump is larger than the NA pump so the piping is going to be shorter and use the same size rubber hose