Supra Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
827 Posts
Discussion Starter · #1 ·
I need to verify which, if any, of the four dip-switches on the back of the unit are applicable to the Supra.

I believe all of them need to be in the "up" position since we have a 0 - 5v system.

Can someone who is SURE verify the dipswitch settings please?

Many thanks
 

·
Registered
Joined
·
827 Posts
Discussion Starter · #3 ·
Okay, so the #4 dipswitch gets put in the down position AFTER the learning mode is over (car has reached full warm idle).

I don't really see anything in the instruction that tell me what to do with dipswitch #3 as it relates to the EIDS. Please explain.

I want to make DOUBLE sure I set this up correctly as I'm installing a single with fuel and VPC all at the same time.

Any additional help would be appreciated.
 
G

·
Since you're running a VPC, leave the EIDS (#3) dipswitch in the UP position. EIDS is used when you are using MAF & have the BOV venting to atmosphere.
 

·
Registered
Joined
·
226 Posts
Yes. The only thing you want to change after learning mode is that specific switch to turn learning mode off.
 
1 - 6 of 6 Posts
Top