Supra Forums banner
1 - 1 of 1 Posts

· Boost Junkie
Joined
·
15,154 Posts
I'd start with the Greddy 3-row. That is what I am running on my auto Supra. I was at BPU++++ (VPC/GCC, cam gears, pulleys, front mount). I noticed no additional lag by going to the 3 row and the car pulls much harder up top. I made 425whp at 22psi thru the MAF, and made 419whp at only 18.5psi after adding the VPC/GCC. It was 90 degrees the day that I made 419whp and the car wouldn't make any more boost.

I have installed my SP63 kit and will have results soon. I am in the middle of installing my fuel system now. Then I'll install the BL Built auto and then hit the dyno.

Steve K.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top