Supra Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
I was wondering if anybody had figured out how too raise the line preassure in the auto trany to get firmer shifts. I heard that some how you can go into the tranny ECU and remove or add some resistors somewhere to increase the line pressure. Anybody heard of anything like this, or am i just outta my mind?
 

·
Registered
Joined
·
314 Posts
If you adjust the kickdown cable it raises the line pressure. Look at your manual or the online one It says to adjust it to 1mm. I set mine 2 to 3mm and had a lot better shifts.

When you raise the pressure you also raise the temp of the fluid. Spend the 60 or so $ and get another cooler or your tranny will be toast soon.

HTH Dennis
 

·
Banned
Joined
·
1,443 Posts
I toasted mine...jacking up line pressure...but it was fun...burned out at every shift......well i can always find newer trannys mine had 170k on it....got one with 65k for 200bux

Also run royal purpel tranny fluid...your tranny will like you
 

·
Registered
Joined
·
40 Posts
Discussion Starter · #7 ·
David_rg79............how did u raise the line pressure, by adjusting the kickdown, cable or a different way, i m just trying to explore my options.
 

·
Registered
Joined
·
249 Posts
When me and my dad rebuilt mine...we upped the line pressure with some valve body customization....thats about the only other option
 
1 - 10 of 10 Posts
Top