Joined
·
1,449 Posts
I am removing my a/c but am going to keep my power steering pump for now. Anyways what size belt do i need ? I have seen bunch of high hosre power supra's with them plus a few other guys so i figure someone has to know .
belt size needed for a/c removal?
1 - 4 of 4 Posts
Joined
·
2,133 Posts
i bought it today... you need a 47 inch belt with 6 ribs....
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Rear ABS sensors
MKIV TechnicalHi guys, During my subframe restoration I broke both of my rear abs sensors. They were seized in the hub. It seems they are impossible to find in Europe. I'm wondering if the sensors from another model fit the Supra. For example the sensors from the Rav4 and Yaris look almost identical in the...- 1
- 137
-
CasperMK2 · updated
-
Traction Control
MKIV TechnicalHi, Just traded for my first manual 94 Supra Twin. I checked all of the vin tags and confirmed it is a twin. My car does not come with the traction switch in the console. I'm not sure if the previous owner removed it or if it was an option for the dealer. Can anyone confirm if this?- 2
- 58
-
2jzgte vvti head porting, opinions please
MKIV TechnicalHi everyone, I’ve been reading supra forums for months and months now. Love this page, and this is my first post. I’m about to port my vvti head and I have some questions pertaining to the valve guides. So, assuming my guides are within spec (it’s a low mile motor), what are your professional...- 2
- 113
-
2JZ GT86 · updated
-
Misfire issue, need some advice.
MKIV TechnicalNote: Car was perfectly fine before it’s last wash getting it ready for a photo shoot.(engine bay was sprayed with water). So I’m driving to the photo shoot location and I start noticing a misfire. The longer I drove it progressively got worse to the point where I would just get pretty good...- 0
- 60
-
JustA2jz · updated
-
Banjo bolt on fuel pump won't budge - ok to use impact wrench?
MKIV TechnicalGreetings, I'm having trouble removing the banjo bolt on the fuel pump assembly. Tried everything I could think of besides an impact wrench. Wanted to ask some folks if that was a good idea or not? I'd really appreciate any insight you can offer. To be clear and avoid miscommunication I found...- 1
- 69
Join now to ask and comment!