boost gauge in lighter postion?
1 - 4 of 4 Posts
Joined
·
6,130 Posts
Its not to hard, heres a pic of my setup:supratkfy said:
It requires dremeling for a 2 1/16 to fit, aight good luck peace
Joined
·
8,421 Posts
easy to do, oh, and btw
S E A R C H!
S E A R C H!
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Swap complete
MKIII (1986.5-1992)We have finally got all the manual trans stuff installled . all I have to do now is get the clutch line sorted out. And finish up wiring.. Drain and refill trans- 4
- 98
-
Chocolate Cowboy · updated
-
twin disk clutch issues.... Help
MKIII (1986.5-1992)Hello everyone needing some help/advice. I have been fighting this spec clutch since first install and the list of issues keeps growing. -MK3 Supra -Rebuilt R154 -Spec Twin disk clutch -Willwood master cylinder ( SPEC Super Twin Dual Disc Clutch Kit 1987-1992 Toyota Supra MK3 SS Trim ) Had to...- 3
- 128
-
TylerW123 · updated
-
So I picked up a 91 in decent condition...
MKIII (1986.5-1992)Firstly, it's original, I'm the 3rd owner, speedo says 187k miles. Runs good, brakes good. Some power steering belt squeak. Here's what I know is wrong with it and some parts are en-route already: It’s got an oil leak or power steering leak, I can’t tell which probably both. Need to de-grease...- 107
- 2K
-
pham · updated
-
Mk3 supra 2jzget knocking after rebuild
MKIII (1986.5-1992)Ok guys I got my block back from rebuild, Cp pistons 10:1 .020 over, stock rods, standard rod bearing, stock head, arp studs. 1.5mm cometic hg. 2jzge head got new valve seals put in. I got everyting put together and it fired up. When it idles and rev up, no knocking or tapping noise, but...- 47
- 2K
-
Two Supras Obtained
MKIII (1986.5-1992)Greetings, I have been a supra addict since I was 15 and got my first supra, the lack of patience, time, money and well the way life works in general I ended up buying and selling four Supras between age 15 and 20. Fast forward to today age 22, I am now living in Northern California with my...- 38
- 1K
-
h20dies · updated
Join now to ask and comment!