Supra Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
202 Posts
Discussion Starter #1
Well i need to save myself some time and ask you guys w/o having to pop my brothers hood and look for it. Where is the location for the stock boost vacuum that i can T and run a new line into cabin for my aftermarket gauge? I heard it is somewhere near the back valve cover on the pass side but i just want to make sure. I am sorry for really sounding noobish, but i do not get around the 1jz a lot so i am also wondering if there is an easier way to do this? Let me know guys.
 

·
Now with 0JZ
Joined
·
1,185 Posts
the stock line runs to a sensor mounted on the far right side of teh engine bay. There's a vacuum line going to a black box, with a set of wires coming out of it. On my JZA70, it's mounted right on the right wheel well. Has a yellow/silver label on it IIRC.
 

·
Registered
Joined
·
202 Posts
Discussion Starter #5
the stock line runs to a sensor mounted on the far right side of teh engine bay. There's a vacuum line going to a black box, with a set of wires coming out of it. On my JZA70, it's mounted right on the right wheel well. Has a yellow/silver label on it IIRC.
thank you. alright time to cap off some lines!
 
1 - 5 of 5 Posts
Top