Supra Forums banner

1 - 3 of 3 Posts

·
CHP's prime suspect
Joined
·
403 Posts
Discussion Starter #1
i posted this before, regarding my Profec E-01 having trouble. It boosts past the set limit every time. It was working fine when i installed the unit, and the problem surfaced out of no where. I have checked the settings and the wiring for the b/c but nothing. :dunno:

Disregarding the fact that it might be a faulty b/c, can this be a mechanical issue with the wategate or other prepherals involved with the vacuum lines ? The boost will keep rising infinitely if i stay on the gas...

any input is greatly appreciated. thanx SF
 

·
Registered
Joined
·
521 Posts
yosuke said:
i posted this before, regarding my Profec E-01 having trouble. It boosts past the set limit every time. It was working fine when i installed the unit, and the problem surfaced out of no where. I have checked the settings and the wiring for the b/c but nothing. :dunno:

Disregarding the fact that it might be a faulty b/c, can this be a mechanical issue with the wategate or other prepherals involved with the vacuum lines ? The boost will keep rising infinitely if i stay on the gas...

any input is greatly appreciated. thanx SF
Replace the solenoid valve - it looks to be crap
 
1 - 3 of 3 Posts
Top