Supra Forums banner
1 - 1 of 1 Posts

CHP's prime suspect
404 Posts
Discussion Starter · #1 ·
i posted this before, regarding my Profec E-01 having trouble. It boosts past the set limit every time. It was working fine when i installed the unit, and the problem surfaced out of no where. I have checked the settings and the wiring for the b/c but nothing. :dunno:

Disregarding the fact that it might be a faulty b/c, can this be a mechanical issue with the wategate or other prepherals involved with the vacuum lines ? The boost will keep rising infinitely if i stay on the gas...

any input is greatly appreciated. thanx SF
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.