Supra Forums banner
1 - 1 of 1 Posts

·
Still Sportin' the Twins
Joined
·
208 Posts
First, are you sure you pulled the right hose?

http://www.mkiv.com/techarticles/vsv/vsv.htm

If so, I'd pressure check your intake for leaks. For a good way to pressure test everything at once, read this old post:
http://www.supraforums.com/forum/showthread.php?p=2816513#post2816513

You might also want to test your BOV in case it's leaking. You'll need a couple big hoses and adapters to do it right, but it's doable. Just make sure you pressurize both the large inlet and the TB pressure source or it will start leaking around 5 psi...

Here's a pic of how I tested my BOV:


David
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top