BOV vacuum line leak can cause?

1 - 1 of 1 Posts

SuperDerek

Registered

Joined Sep 30, 2003

311 Posts

Discussion Starter • #1 • Nov 4, 2003

I'm on my way to replace this short vacuum lines.
I know it leaks, but what kidn of problems could that cause?

I realized that Toyota dealership's part list doesn't have that perticular part listed in teh system and instead I found that alot of vacuum lines use the same part number with different length indicators, so i guess Toyota just ask to cut them in order to fit different connections.

Let me know if you guys have more experience with this.
thanks

1 - 1 of 1 Posts

Join the discussion

Recommended Reading

Guys with E11v2 experience

MKIII (1986.5-1992)

Hey guys. I've never quite run into an issue like this with a stand alone but then again it's my first time playing with an E11V2 (my of my experience is with the elite series). Setup is: E11v2 on a 2jz-ge 1nz coil on plugs 7m cps Hyper tune intake. FID 800cc injectors Anyways, got everything...
- 4
- 39
- D-Oaten · updated 1 h ago
7mge aftermaket intake manifolds

MKIII (1986.5-1992)

Every thread I see of this is from the early 2000's so maybe things have changed but does anyone know of an aftermarket 7mge intake manifold?
- 7
- 118
- Supraj91 · updated 2 h ago
Rebuilding a grenade ( crazy damage!)

MKIII (1986.5-1992)

I opened up the blown 7mgte to find some crazy damage. Part of a rod went through the block. I'm not sure what kind of damage the head takes when something major like that happens but I'm hoping the head is re useable....after taking her off it looks pretty good to the eye but I'm not sure. Now...
- 2
- 57
- SavageSlav · updated 3 h ago
Is a mk 3 a good first car option for me?

MKIII (1986.5-1992)

I have tools, a friend group ready to work on a project, and a backup car. I know nothing about these and to my suprise they are pretty cheap in my area. What are the major issues with these when buying used?
- 2
- 51
- N
  NiganDong · updated 3 h ago
A 7M stock rebuild at home for under $500

MKIII (1986.5-1992)

So all winter I've been picking away at the 7M, and now it's a completely stripped block. Follow along as I rebuild it with tools most of you have around your garages. This is a regular rebuild of a 124k engine that blew a head gasket 20 years ago and the car was then parked near Mt. Rainier...
- 4
- 152
- I
  IdahoDoug · updated 15 h ago