A
a1clark
·Guest
Joined
·
0 Posts
Does anybody use an aftermarket BOV with the Stock Turbos? Is it a bad idea or good? Benefits?
BOV with stock turbos
1 - 4 of 4 Posts
P
paul_c
·Guest
Joined
·
0 Posts
Probably your stock BOV is fine. I waited until I got a FMIC, then welded one on the intake pipe. I'd put my money elsewhere.
Joined
·
658 Posts
there is no need for an aftermarket bov at stock leval of boost other than the nice noise it makes. even at bpu the there are no benefits in fact besides the hks ss the other aftermarket bov tend to stall at low rpm they are relly designed for high boost applictions. See mkiv.com and for next to nothing you can do the Twin stock bov mod. It makes more noise than stock and flows twice as much as well and it will only cost you the price of some tubing and a used bov
Joined
·
1,522 Posts
Get a blitz super sound just for the kewl splashing sound.
1 - 4 of 4 Posts
Join the discussion
Recommended Reading
-
Rear ABS sensors
MKIV TechnicalHi guys, During my subframe restoration I broke both of my rear abs sensors. They were seized in the hub. It seems they are impossible to find in Europe. I'm wondering if the sensors from another model fit the Supra. For example the sensors from the Rav4 and Yaris look almost identical in the...- 1
- 131
-
CasperMK2 · updated
-
Traction Control
MKIV TechnicalHi, Just traded for my first manual 94 Supra Twin. I checked all of the vin tags and confirmed it is a twin. My car does not come with the traction switch in the console. I'm not sure if the previous owner removed it or if it was an option for the dealer. Can anyone confirm if this?- 2
- 57
-
2jzgte vvti head porting, opinions please
MKIV TechnicalHi everyone, I’ve been reading supra forums for months and months now. Love this page, and this is my first post. I’m about to port my vvti head and I have some questions pertaining to the valve guides. So, assuming my guides are within spec (it’s a low mile motor), what are your professional...- 2
- 113
-
2JZ GT86 · updated
-
Misfire issue, need some advice.
MKIV TechnicalNote: Car was perfectly fine before it’s last wash getting it ready for a photo shoot.(engine bay was sprayed with water). So I’m driving to the photo shoot location and I start noticing a misfire. The longer I drove it progressively got worse to the point where I would just get pretty good...- 0
- 60
-
JustA2jz · updated
-
Banjo bolt on fuel pump won't budge - ok to use impact wrench?
MKIV TechnicalGreetings, I'm having trouble removing the banjo bolt on the fuel pump assembly. Tried everything I could think of besides an impact wrench. Wanted to ask some folks if that was a good idea or not? I'd really appreciate any insight you can offer. To be clear and avoid miscommunication I found...- 1
- 69
Join now to ask and comment!