Brembo stock replacement rotors: slotted or x-drilled?
1 - 3 of 3 Posts
Joined
·
1,662 Posts
I'd go with blanks personally.
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Brake caliper colours - post your pics!
MKIV TechnicalI am about to repaint my brake calioers. I’m looking for ideas (my car is white). Post your pics - try and show your car color - and let’s see what’s out there. I will post after pics when I have some ideas. Sent from my iPhone using Tapatalk- 5
- 182
-
HELP installing 272 Cams
MKIV TechnicalAfter I have installed all the new seals, BCsprings, retainers, locks and buckets, with T-belt off, put crank at -10 btdc so all pistons are slightly down, install new BC 272 cams, install cam gears, torque cams as per manual. Then turn CAMS clockwise to tdc notches, and than turn CRANK to tdc...- 5
- 105
-
rallly · updated
-
Supra MKIV JDM Brake Lines routing help!
MKIV TechnicalHi!! I need a little help!! Anyone knows the connection or the route of the brakes lines please? I Made this drawing. Thanks in advance.- 8
- 3K
-
lucassanabria · updated
-
Rhd jza80 HID kit
MKIV TechnicalRecently acquired a rhd supra and slowly starting the process of swapping things over. Got myself some glass headlights and wanted to swap bulbs while I’m at it. Been told jdm lights differ from usdm. Hard finding more info on this. Thoughts? Trying to find a quality hid system, seems LED isn’t...- 3
- 219
-
2JZ-GTE Igniter - Required when you go to a aftermarket harness + ECU
MKIV TechnicalI came across asking myself today, do you need a igniter when you go to a aftermarket ECU and Harness? I noticed my friend is running a MOTEC and does not have one for his car.- 2
- 277
Join now to ask and comment!